Activity Stream

I missed the distinction between 32016 and 32032, sorry. Hopefully that didn't derail the thread too badly. Looks like the '016 also has the...

I have seen that '50W 5ohm resistor' specified at here], but not specified elsewhere. A 5Ω/50W resistor is going to be unsuitable for some power...

Just curious as to why you insist on cut rate stuff when for a few more bucks you can get a good nights' sleep? I can understand that with...

Keep in mind ebay prices tend to be horribly overinflated. This is a well known problem.

Yes, that is right.

Chuck I think you need to read it as Natural Latex Free AND Sulfur Free. Not that it is natural latex which is sulfur free. I am guessing here. On...

That should not be necessary. The most straightforward approach is to find the failing component and replace it. My thought about the pot was that...

So it was not the pot indeed. I sprayed and I do not know how much time one needs to wait but it is the same as before. Thank you for all the...

Since when is PU "natural latex"? What sort of tree makes it? :)

Thanks for the pictures I assume you are using the smaller bands for the DC100 and the bigger bands for the DC300 (and probably the DC600s?)

Well I got the prototype DS1225Y from GW yesterday and installed it in my motherboard. It looks great (love the LED). I still need to read/write the...

So Vogons was wrong. The 486 board is not a Tekram board. It is an ECS board. Unfortunately, it is requesting a cfg file (!ECS1020.CFG) that I can...

Links: CSHOW/CompuShow: http://www.cshowplace.com/cshow.htm...

The address bus is only valid during T1 and should be latched on a low to high transition of the /AS signal. This is because the AD0..AD23 signals...

The Mobilon bands (if that was what you were referring to) are PU (says the spec on the Misumi site). It actually says "Natural Latex and Sulfur...

that approach won't work for me as I want to test a replacement p/s I just received, one that's rated for 800 watts. Not looking to torture test it,...

Save yourself some time without all the fuss and just grab an old mobo and an old HD or floppy and go from there.

Yes, that's correct. You need two drives on the device. XD2031 will do this properly and Andre' recently fixed some problems with REL handling that...

Latex, not PU? If latex, they'll deteriorate very quickly, so not for archival use.

A picture is more than a thousand words (or whatever the proverb is), right? The green band is a Baumgarten band.

If that does not help, there are separate pins from the drivers that go to the connector so it is possible that there is a bad transceiver signal at...

Dave, thanks for the image. It looks like that adapter would provide a slick way to grab power from the existing connector on the planar, but...