Activity Stream

I don't know at this point, however, I must mention that the card is being used in an AT&T 6300 an XT clone. I noticed the hint document mentioned AT.

I didn't document it, but it would have been one of two CRT's. Looking at the Apple IIc schematic, the CRT there is a C10M42P31, and I must have...

Yes, TC has inline assembly, I think since 2.0. But in 2.0 the projects with it cannot be compiled from IDE, and I think it has some limitations. At...

There is no alternative..... eBay has the money to tie up EVERYONE in litigation so they have monopolized the market.

Ok totally off topic, but Alien Syndrome for the C64 was better then the arcade version imo.

I never got to play Mines of Titan (rpg) but I was obsessed with Mars Saga on the C64 for a while (same game more or less). 2400 A.D. wasn't very...

In case anyone wants to use an Extron (or other device with HD15 in) with a Concept, here is the cable wiring: DB9M HD15M 1...

Star Flight. I was impressed on how well Ikari Warriors ran on my friend's 1000 TX. I had an ITT Xtra XP also with a 286, and an NSI vga card...

Does the BIOS on that card support dynamic configuration? If so you can just enter the values as shown in this document: ...

This is very cool, great job! :) Thanks for the update. Cheers mikerofone

uAtx is 9.6" x 9.6". Don't expect to fit anything larger then that.

Sim City runs on my Tandy 1000A just fine. Quite a lot of fun with the Deluxe Mouse. I also have to put Arkanoid and Arkanoid II up there as good...

For me, the 80's and 90's were the most interesting era. Part of it is nostalgia, the other part of it is that I did not have the money or age to...

Well, that's why DHCP hangs. Maybe Mike B. can help on this one, but it sounds like an interrupt problem to me.

I'm not sure if the data point is useful, but I paid $135 for a Model F back in April. The keyboards can go for a lot, but there can also be a lot...

It should not be necessary to do anything highly complex. The protocol is actually very simple. Take for example the Kaypro parallel port, which...

I think it'll fit but if not I got some boards will. The depth is okay at 9.6" but there may be a problem with the width.

Speaking only for myself, I don't have a great deal of interest in software being currently developed and released because to me, this is much of the...

you're going to put it in that? Is it a uAtx board?

I've got this new Asus Crosshair VI mobo sitting in its box and I'm thinking of building a nice unit for some granny or her grandson and put it on...

on another 486 machine - boots properly. I checked all jumper (address) combinations. It looks like the card doesn't have own memory (on 286 with...

When I do a ping, I get : timeout waiting to ARP response.

Ah first of all, I just reread my post. I wrote 1uF/25v for ceramic caps. It was a typo: I actually used 10uF/25v, lost a 0 :-) Regarding the...

So forget DHCP for the moment. If you don't start DHCP (just start the packet driver), can you ping out to a known IP address? If not, then DHCP...

To test a bare Tandy 1000 HX motherboard before hacking together a keyboard I made a boot disk with an ancient version of PC Anywhere on it set up to...

Been there, done that. I sell on eBay, and yes, as a seller you are screwed when dealing with buyers. The "Does not match description" thing is used...

I snaggeda Raidmax case 2+ years ago for precisely 12.09$ after the rebate. It's lite, it's a full mid atx tower. And best of all it's black....

The doc that I have says that the ST-01 can use IRQ 3-5 or none. I used interrupt 0x64 and 0x68 and still the same issue.

Don't really need it but I bought one anyway. The price is right - come on down!