- Scanners
- The "Amstrad Adjusting Hammer".
- Cleaning old computer equipment...
- Heathkit OM-3 Oscilloscope
- Product Review - Free Spirit Drive Alignment for 1541 1571
- Long hex screwdriver for Compact Macs
- Anyone knows how can I fix my keyboard?
- Soldering iron and tips
- TV to Oscilloscope >Gasp! Sorcery!<
- desoldering
- What tool do you recommend for deleting private data ?
- parallel port floppy interface for disk imaging?
- O-Scope?
- How to clean boards and connections
- How to NorthStar Hard Sector Floppy Transfer to PC with Compaticard II
- ROM programmers
- paper tape end cutter
- HP 1615A Logic Analyser manual anyone ?
- virtual floppy drive using PP and RT LInux
- Power Supply
- System General SGUP-85 Universal Programmer
- Catweasel and cw2dmk plug...
- Cleaning cases - Mr Clean Magic Eraser
- Blown capacitor on motherboard
- Another Disasterous meeting with Mr Wabash
- Good TTL Logic Simulator?
- The ultimate tool for freshing-up/Fixing old mechanical stuff!!!
- Soldering Skills Any Kits?
- What Hardware-Testing equipment do you Use ?
- tools for the newbie
- Repair techniques
- Technician's Best Friend
- Z80 processor exerciser?
- Eprom xm512 simulator software
- Need advice buying an EPROM programmer
- AMP Tool: Commercial MATE-N-LOK pin crimper
- latest aquisition
- POST Testers
- Leap Electronics ROM/RAM Emulator
- KryoFlux - USB Floppy Controller
- Model 28 EPROM Programmer?
- Looking for manual to a SD 20/24 PAL Programmer
- f/s on epay uk eprom programmer £20 BIN
- cheapo eprom UV eraser
- Z80 cpu plug-in diagnostic
- Goldstar Oscilloscope
- moldy diskettes - how do I clean 'em?
- How to connect fluke 9132a-024 rom module?
- EPROM programmer recommendations
- XMEGA Xprotolab (Tiny Digital Storage Oscilloscope for $35!)
- Opinions on HP Logic analyzer?
- DIY Logic Analyzer
- Great tool for desoldering
- Your electronics workbench
- Recommendations for an inexpensive EPROM programmer?
- Hi, I'm back!
- Digiac 5504 floppy tester
- KyroFlux and the SPS
- Soldering station for home? Hakko?
- Using a 3D printer to produce replacement parts for vintage computers
- Replacement for floppy drives - Anyone tried one?
- Harvesting soldered parts from non-functional boards...
- How to safely probe a sound card with a multimedia speakers 3.5mm headphone jack?
- bios battery replacements
- Pin Straightening Technique
- Vintage VOM battery replacement
- General Components
- Basic computer repair/maintenance toolkit
- Need a used scope
- ISA POST status reader and IRQ tester
- Circuit drawing and trace repairing tools
- I want to teach my son how to solder
- Ibm xt
- Digelec Model 803 Rom Burner
- LBI101 Oscilloscope software
- PC connected O-Scope/Logic Analyzer
- Anything special about programming 27512 eproms ?
- Dave Dunfields Imagedisk
- Would this oscilloscope be a good buy for testing old equipment?
- Viztek IC Tester Model VZ-4
- Looking for Manual HEATHKIT ETI 7510
- HP1600A Analyzer Clock
- Tektronix 1240 vs 1230 ?
- Willem Programmers
- Pro Log M980 programmer
- Tektronix 1230 Logic Analyzer
- Z80 In-Circuit-Emulator
- Using a plotter to print PCBs on... paper
- My new toy: USB Microscope
- Alignment disks?
- Drive not ready error when using Catweasel, 8in and 5 1/4" in drives *together*
- Oscilloscope with ground pin on wall socket removed?
- Guide to EPROM programming (Genius G540)
- Newbie questions re EPROM programming
- Got an IBM Model M keyboard? Need a nutdriver?
- Any recommendation for a logic probe?
- Best purchase I've made in years
- Oscilloscope Recommendations
- CAD programs
- 41256 DRAM Tester
- Signetics PLS153A programmer
- Dajen SCI Tools
- EPROM programmer recommendations
- RS-232 to Current Loop Interface
- Floppy tape (QIC 117) tools?
- Data I/O System 19 programmer docs?
- Looking for PROM programmer
- wire wrap
- Makeshift Stroboscope
- Best binocular loupe for repair work?
- Weller solder station burning up tips
- Vintage Test Equipment
- Soldering/ Unsoldering gear recomendations.
- Brian "Brikon" Floppy Drive Tester
- How To Do A Flyback Ring Test With An Oscilloscope
- PC "Tweeners"
- Fluke 9010A
- ISO: Bytek S-10 Manual
- 2016's Best Logic Pulser for Troubleshooting
- What 5.25" floppy drive do you guys use to write disk?
- When You Pretty Much Have to Get the Logic Analyzer Out
- HP 1650/1651 Logic Analyzer Disk Images
- CRT Cataract Removal
- Zax ICD 278 for Z80
- Step Engineering, Step 3 and Step 4..
- Applied Mirosystems EM-184 Probe Tip Information - 10486-170
- SIMcheck power supply question
- Anyone Interested in an XT-IDE EEPROM Programmer Only Kit?
- Which oscilloscope to choose?
- Cleaning sticker residue from EPROM chips (which solvent?)
- Hardware simulators
- Gettin rid of the black goo....
- Source for perforated thermal paper? (Panasonic Sr. Partner)
- Digelec Serial Pinout
- Shugart 8" Single-Sided Analog Floppy Alignment Disks on Ebay
- Which Deoxit?
- ERS Meter
- Tandy 2500 sz/20 computer was in storage,
- Data I/O 29B / Unipak 2B adapters.
- In circuit emulator recommendations (Z80 & 6502) ?
- Can a retro-computer be a useful way to learn computer-architecture fundamentals?
- Simple Arduino-based EPROM programmer
- Need assistance fine tuning floppy emulator on Kaypro 4/84
- Needham's EMP-20 Device Programmer
- Philips PM 8422 mab Z80
- Vintage Motorola/Freescale/NXP Tools and MCUs available
- Making useful stuff with junk, redux.
- EPROM programmer.
- ABI DDS-40 XP I must be blind!
- How I clean my CRT's
- Z80TAT Z80 emulator debugger ?
- 8008 and Z80 ICEs
- wire wrap wire
- Archiving QIC tapes
- Compaq LTE Lite Service Manual
- More facets of hard disk recovery (SA1000, RD53) and emulation
- USB FPGA Logic Analyzers: Worth Investigating?
- 3D Printing for Vintage Computers
- Need help sourcing a crimper
- Horror! ABI ICT24 Chip tester Faulty - and Probable Fix
- Need Help finding small Fluorescent Lamps..... Dont need LED!
- Looking for someone with GQ-4X programmer
- HP Logic Analyzers - HP Pre-Processor Modules - HP Inverse Assembler
- Connecting a Needham EMP-20 eprom programmer to a modern laptop PC
- Flux recorder/writer capable of 8" hard sector?
- Open source flux reader/writer running on $2 bluepill board
- Utility to convert intel hex into ascii stream for sending from terminal emulator
- Amscope Microscope on Ebay
- Need a new ROM Programmer.
- command-line tool that gives info about what's in a .scp (SuperCard Pro) file?
- Hy-Tronix Myriad/xk 440 IC Tester
- Any disadvantage to imaging Apple disks with a SuperCard Pro?
- Looking for information on Bytek Ultraviolet Multiprom Eraser BUV-3B
- Anyone savvy with the TL866A Mini pro willing to shed some light?
- Blank Check Failed with AM28F010
- Needham's Programmer - EMP 1.7 Software - [29.3 MB] for NT4 SP6a
- Tool for inking ribbons: MacInker replacement
- Looking for Texas Instruments TMS320C2x DSP Starter Kit, or related parts [M-ACPA]
- How to test memory?
- WTB: Anyone have a a universal Zif card for an HP 10529A Logic Comparator?
- Show us your vintage test equipment and tools! :D
- Click&Play, create portable executables by integrating any emulator easily
- B&C Microsystems RomEm
- Erasing UV EPROMs
- Anybody have experience with the DANIU ADS1013D DSO?
- Info about the STARTEK DT-90 Dram Tester.
- The Startek DT-90 Project.
- Program MC2402 with ST-Link/V2
- Can anyone recommend a cheap ESR meter?
- Is Hantek DSO5102P Oscilloscope good for hobbyist?
- "Blue Pill" dual-trace oscilloscope
- Original PAL programming algorithm
- My new JBC Precision Micro Soldering Iron got to do hand 0805 SMD assembly
- Help needed with setup & useage of Willem EPROM Programmer V508 version PCB50B
- Which crimper should I buy to make these connectors?!
- How about the Hakko FR-301 desoldering gun?
- Where can I get a replacement pin straightener cheap?
- Need software for Grammar Engine PromICE
- TTL-logic tester
- Delsodering Cleaning Tool
- Replacing cord in vinyl strain-relief
- Arduino 4116 dram tester. Free Gerbers.
- Soldering station heating element replacement