PDA

View Full Version : AC adapter for Dayna PORT SCSI/Link-T



kb2syd
April 3rd, 2008, 08:43 AM
Does anyone know the specs for the wall wart for one of these? I have seen 2 different ones, and would like some clarification.

I've seen 9V DC center positive and 12V DC center positive.

Thanks for any help,
Kelly


PS Please move to a different area if needed... These are primarily used with Macs, which is why I posted it here.

IBM Portable PC
June 23rd, 2015, 12:54 AM
An old thread I know, but why start a new one for the same item if we can avoid it?

The answer to the original post, for those that may need to know, is 12V centre positive.


My question is, does anyone have a PDF of the manual for this device?

I have found some drivers here:

https://68kmla.org/forums/index.php?/topic/24303-daynaport-installer-driver-needed/

And from there, here:

https://68kmla.org/forums/index.php?/topic/23832-driver-for-daynaport-e30/

Are these latest/last released?




More information is here:
http://goughlui.com/2013/07/28/tech-flashback-daynaport-scsilink-t/


The device is also now used with Atari ST systems:
http://www.anodynesoftware.com/ethernet/main.htm

RWallmow
June 24th, 2015, 03:29 AM
For the record not all Dayna SCSI Ethernet devices are the same voltage, I've got the "Pocket SCSI/Link" it's 5volt, draws power from the ADB port, just throwing that out there if someone stumbles upon this looking for a power cord for one of them ;-)

IBM Portable PC
June 27th, 2015, 09:58 PM
Someone must have a manual?

It's odd that drivers are readily available, several version from several sites, but no manual.........

RWallmow
June 28th, 2015, 07:00 AM
Someone must have a manual?

It's odd that drivers are readily available, several version from several sites, but no manual.........

Manuals for something like this aren't super useful, there's not any real settings or anything other than SCSI ID and termination and that was printed on my Pocket Link. The rest of the config is the macs TCP/IP settings and that can all be googled if you're unfamiliar. If the manual that came with these was more than a sheet or two of paper I would be surprised.

g4ugm
June 28th, 2015, 12:52 PM
I have two and don't think I have ever seen a manual...

IBM Portable PC
June 29th, 2015, 07:47 PM
Well, I won't hold my breath for a manual then........

I've also read where the Dayna SCSI->Ethernet units are not as stable as the Asanti units, however the Atari folks don't appear to have any issues and their not even using Dayna supplied drivers.

Has anyone had experience with both brands on Macs?