PDA

View Full Version : XT HDD Faceplate for Half Height HDD



QuantumII
March 25th, 2009, 12:41 AM
Hi all,

Do you know where I can get a faceplace / mounting bracket to match my Seagate ST-225 HDD ?

Currently, I only have the large black blind-panel where the HDD is, and it's mounted with only 2 screws on one side (It does not have the mouting bracket for the Half Height HDD.

My XT has 2x half height 5 1/4 inch floppy drives, and one ST-225 HDD.

Any full height HDD with faceplace (black) would also be a nice solution.

84TAVeRT
April 2nd, 2009, 12:32 PM
i have a single half-height black xt blockoff plate... i was planning to sell it with my seagate st-225 drive and controller...

later,
Chris

84TAVeRT
April 2nd, 2009, 12:33 PM
sorry... shipping would be killer to norway...

QuantumII
April 2nd, 2009, 01:15 PM
i have plenty (3) mfm drives, so I would only need the blocking plate.