View Full Version : NEED HELP!

March 19th, 2005, 03:43 AM
Ok people I could really use some assistance. I have just moved and I have lost my manual for my Via VT8235 Mobo. I have no idea how to plug in those "power sw" and other small wires to the mobo.
If anyone can help me I will be very very happy.


joe sixpack
March 19th, 2005, 12:19 PM
VT8235 is a chipset so it has nothing to do with the pins for the connections
find out what board you have then look for a manual online.

if you can't find a manual look on the board lot of times they are marked.
other wise it's a little bit of guess work.

power led can be ether 3 pins or 2, i've seen both. if it uses 3pin then it will be 1x2 where as the middle pin "x" is not used.

rest, power switch & hdd led are all 2 pins so you kinda gotta guess
you could use a multimeter but i just try them out with a one of the led's

turbo led, turbo switch, keylock arent used on many of the boards now days.
good luck!