PDA

View Full Version : IBM Model 95 XP Problems -- Could use some help



irishmike
May 16th, 2009, 02:18 PM
Greetings:

As many of you know, I have an IBM Model 8595 (95 XP) that I recently acquired.

I decided to put OS/2 Warp 4 on it and so I decided after upgrading the RAM and putting a bigger 2GB SCSI drive and temporarily a SCSI CD-ROM I am getting an error I999 0010.

This is a microcode error?

In preparation for this I backed up the system partition from the former drive and did a restore on the new SCSI drive but alas it gets this error. My Backup of the system partition (Reference) boots fine and does have the configuration information on it.

What did I miss? Is there something I need to do to the drive (like a low level format) or any other kind of prep or is the drive just bad?

Any help is appreciated.

modem7
May 16th, 2009, 03:41 PM
Maybe the following is the issue: http://www.mcamafia.de/mcapage0/scsi1gb1.htm

irishmike
May 16th, 2009, 04:02 PM
@modem7: That could be. I don't have an EEPROM burner though so perhaps someone here has the updated ROMs already or could make copies of them? PM me and let me know.