PDA

View Full Version : Commodore Datassette 1530



Oblido
January 4th, 2006, 08:58 AM
Hi, does anybody know roughly what diameter belt i would need for a C16 & Plus/4 Cassette deck please ?

NathanAllan
January 4th, 2006, 01:27 PM
Do you have one? The cassette deck, I mean. If you do, do the fan belt trick and use a piece of string or fishing lure, wrap it around the pulleys that the belt goes, and measure it. Then find the appropriate belt. Works on a fan belt.

carlsson
January 4th, 2006, 04:39 PM
I can't vouch for the black 1531 (the Plus/4 model, 1530 is the VIC/64 and they're all called C2N after the first, square one) but I have a bunch of broken 1530's of which I opened one.

The belt from motor to tape is approximately 26-27 cm in diameter, unstretched. The belt from tape to counter is approx 19-20 cm. Neither is stretched a lot. I would believe the mechanism in 1530 and 1531 is the same, only different interface.

Oblido
January 5th, 2006, 03:49 AM
Thanks for you replies ... i think my memory in my head needs upgrading as i was sure the deck was a 1530 - i have a C16 and a Plus/4 and i've just found the cassette deck manuals this morning which tells me they are 1531 ! :oops:

Yeah, i could theoretically measure the belt path and work out a diameter, but i was not sure how much to subtract for the stretch, if you see what i mean. The old belt i've removed measures roughly 8cm in diamater, but i guess that belt is a bit stretched and oversized (which is obviously why the deck is not working ! :roll: ), so i was trying to work out a suitable size ... i've ended up ordering a 7.5cm and a 6.6cm dia belt from a local electrical company ... i'm hoping one or the other will do the job.

carlsson
January 5th, 2006, 08:38 AM
Ah, sorry. When I wrote "diameter", I mean circumference. :oops:

So, a circumference of 26-27 cm equals a diameter of about 8.4 cm, and I don't think my belt was stretched beyond operation. I could plug in the drive to see that the tape is going.