View Full Version : NEC Multisync 3D scrapy screen

May 8th, 2012, 04:49 AM
On ebay I have bought a NEC Multisync 3D for my vintage machines. But it has a scrapy screen. The color white don't exist ( it looks like pink/lila ) and there are two wide beam from the top to the bottom of the display.

Is it reparable and what could be defektive?


May 9th, 2012, 01:35 AM
Not to hijack your thread, but I too am interested in a problem with my MultiSync 3D (just pulled it out of the closet again last night in fact).

Ever since I bought it (new in the box back in 1989 or so), it has an almost-straight (slightly curved) white line running along the left-most 3 or 4 inches of the screen at the very bottom.

It becomes more visible the higher the contrast setting. It looks almost like a piece of thread, and will flicker at high contrast settings but is un-noticeable if the contrast was turned down.

I'm hoping some of the monitor guru's here can chime into either problem.