PDA

View Full Version : Compupro disk 1



Marty
July 18th, 2012, 06:26 PM
Hi All;
Is there a source that I can go to that has CPM for the Compupro Disk 1 floppy controller. that I can download ?? As this controller uses a different type of Floppy chip (8272/765) than the Tarbel (1793) , which I have source for..
THANK YOU Marty

Chuck(G)
July 18th, 2012, 06:33 PM
There's a bunch of source in the back part of the Disk 1 manual on bitsavers (http://bitsavers.informatik.uni-stuttgart.de/pdf/compupro/171F_Disk_1_Technical_Manual_1982.pdf).

Marty
July 18th, 2012, 06:43 PM
Hi All;
THANK YOU Chuck !!!!
THANK YOU Marty

amouse
July 19th, 2012, 01:46 PM
Yes well, I still have the controller card and the original disks ...

301 GLSSSDST Copy of CPM 2.2 64K system and utilities and Godbout BIOS
302 GLDSDDST Copy of 301
303 GLDSDDST missing
304 GLDSDDST Godbout 48K master 1K sectors
305 GLDSDDST Godbout 512 byte sectors 32K CPM 2.2
306 GLDSDDST Godbout 512 byte sectors 32K CPM 2.2
307 GLDSDDST Godbout 512 byte sectors 32K CPM 2.2
308 GLDSDDST Godbout 512 byte sectors 32K CPM 2.2
309 GLDSDDST Godbout unknown
310 GLDSDDST CP/M-80 Version 2.2K serial 272-00016 1981 Digital Research

but no working system to test them on.

I did scan my manual and then OCR'd it and it went horribly wrong. SO I keep a few versions of it in this directory

http://maben.homeip.net/static/S100/compupro/cards/index.html


regards marcus b

PS: The Compupro / Godbout disk 1 was the card without a serial port so it used the CPU and some bit banger code (I'm going from memory now) to read from an ASCII terminal