PDA

View Full Version : GIDE replacement project



NobodyIsHere
August 25th, 2012, 05:09 AM
Hi
I am considering making a GIDE replacement board based on the XT-IDE V2. The GIDE is a neat circuit but no one is making them any more and the it has some hard to get components.

The new board would not be backward compatible with the GIDE since there are some significant differences. It would include the optional boot ROM and optional UART though since those have proven to be quite useful.

There is a preliminary schematic already and if you are interested in participating in this project please let me know.

Thanks and have a nice day!

Andrew Lynch

lucasdaytona
August 25th, 2012, 05:52 AM
Hello again Andrew!

Could you post some info about this GIDE? I tried google, but no good luck.

Thanks to you, and have a nice day sir!

pearce_jj
August 25th, 2012, 08:24 AM
Try this: http://www.retrotechnology.com/herbs_stuff/gide.html

NobodyIsHere
August 25th, 2012, 12:16 PM
More information here. Please review schematic and PCB layout and send me any changes and/or corrections.

http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=ZIDE

Thanks and have a nice day!

Andrew Lynch

pearce_jj
August 25th, 2012, 01:03 PM
CSEL should be directly to ground (10k PU in the device).