PDA

View Full Version : Anyone use Cypress PSoC 5?



Chuck(G)
April 10th, 2013, 05:35 PM
I recently stumbled across the Cypress PSoC CY8C52LPxxx chips, which look very interesting. A 32-bit ARM3 integrated with PLD array and the usual peripherals. Separate digital I/O supply rail that can be run at 5V (not just 5V tolerant, but the outputs will present a high level of 0.7*Vddio, or 3.5V at 5V. Fairly generous SRAM with support for external RAM; runs at around 67 MHz.

What do you think?

tingo
April 11th, 2013, 05:45 AM
Interesting. Are there any cheap evaluation boards / kits?
What tools / toolchain(s) are available to program this? Only manufacturers proprietary tools, or support for gcc or other open source tools?

gslick
April 11th, 2013, 07:23 AM
Looks interesting. I'll have to read more about this device family.
PSoCŪ 5LP http://www.cypress.com/?id=4562

Only dev kit I've found so far (haven't really looked around yet) is the CY8CKIT-050 PSoCŪ 5LP Development Kit for $99
http://www.cypress.com/?rID=51577