PDA

View Full Version : Need Power Supply for Laser Compact XT



Al Hartman
August 18th, 2013, 06:31 AM
I have a Laser Compact XT Computer I bought several years ago.

It is basically an IBM XT Clone in a Laser 128 (Apple ][e Clone) case.

http://www.techheadpc.com/sites/all/themes/corporateclean/images/300px-F_CompactXT01.jpg

I don't have a power supply for it. If anyone can help me find one, I'd be most appreciative.

Al

Stone
August 18th, 2013, 07:14 AM
If you wanna change the plug I have several that supply +12V, -12V and +5V. Here's some pics:

14812 14813 14814

These are NOS.

Al Hartman
August 19th, 2013, 03:33 AM
I have an extra Atari-ST Power Brick I could adapt by changing the plug. But, I was hoping to find the one that came with the unit.

vwestlife
August 19th, 2013, 04:29 AM
Maybe the power supply for a Laser 128 would work with the Laser XT as well?

http://www.ebay.com/itm/151088884114

Al Hartman
August 19th, 2013, 06:43 AM
The Laser 128 unit outputs different voltages on different pins.

The Laser Compact XT needs +5v, +12v, and -12v as the power supply above supplies.

Al Hartman
August 19th, 2013, 06:37 PM
What I did today is to order a 7 pin DIN male and female connector so I can make an adapter. I don't want to cut the connector off the Atari Supply, but with the adapter I can use it until I find the proper supply.

Now to find 4 - 4464 chips so I can kick it up to 640k.