PDA

View Full Version : Supply power to this strange board?



Jack.
December 24th, 2013, 11:34 AM
1647216473164741647516476

Got this from a strange videorecorder like computer case, something that looked like a chinese copy or something like that.

Anyone knows how can i sullpy power to this? It could be a good kind of single board computer into the proper setup.


-EDIT-
List of I/O
COM1
COM2
PARALLEL
AUDIO IN
AUDIO OUT
ETHERNET
S-VIDEO
COMPOSITE VIDEO
VGA VIDEO
IDE1
IDE2
PS2 MOUSE
PS2 KEYBOARD
USB 1.0
USB 1.0

It has also a daughter board to connect expansion cards, still have it somewhere, it should be PCI
The actual RAM is 128MB

Chuck(G)
December 24th, 2013, 11:52 AM
I think this board is late enough that coloring convention for the PSU wires should apply. That is, black = ground, red = +5, yellow = +12, etc.

See:http://pinouts.ru/Power/ for some hints.

Jack.
December 24th, 2013, 12:53 PM
Thanks for the quick reply, so it should look like this?

16479

Thanks,
Jack

High_Treason
December 24th, 2013, 01:29 PM
That looks a lot like something First International Computer would make... Any idea who made it?

Chuck(G)
December 24th, 2013, 03:00 PM
Well, if you can find a part number on the motherboard and it is FIC, you just might be in luck. The FIC ftp (ftp://ftp.fic.com.tw/) still has a ton of stuff on it, including manuals going back to the Socket 7 days.

Jack.
December 25th, 2013, 01:13 AM
Well, on the MOBO there is just one label, stating: MB3036 V2.3
Another thing, written in ink, is 823

John R
January 11th, 2015, 10:15 AM
starting from left to right, looking from front:

blk = 0
blk = 0
blu = -12 0.3 A
yel = +12, 2 A
red = +5, 3 A
then no connection


see pix z41102.jpg

I could never get this MOBO to recognise more than 256 MB RAM.

Anyone else have luck?