PDA

View Full Version : Help please identifying Wang bits



acollins22
June 29th, 2014, 05:18 AM
Hi Folks,

I've recently come into a pile of Wang PCBs from a car boot sale. I not into Wang stuff myself but I still didn't want the stuff to go unsold to landfill as it's unlikely there will be any Wang fans at a sale like this and that seems the most probably fate for this stuff.

I think it's 2200 stuff but if someone with more knowledge than me could cast an eye over it at give me an opinion, I'd be grateful.


Thanks.

Andy.
19241 19242 19243 19244 19245

acollins22
June 29th, 2014, 05:23 AM
A few more...
19246 19247 19248 1924919250

acollins22
June 29th, 2014, 05:27 AM
And finally...
19251 19252 19253


Please let me know if you have any clues as to what this stuff is.


Thanks.

Andy.

pine-koan
August 11th, 2014, 08:29 PM
The very large boards are I/O boards from a VS85/90/100 system. Possibly SMD disk controller boards. The smaller ones with the aluminum bracket/plastic handles are from a 2200.

pine-koan
August 11th, 2014, 08:30 PM
The little board with the coaxial BNC/TNC connectors is a SIBLINK, which was used to add the proprietary Wang interface to non-Wang printers and other peripherals.

m_thompson
August 12th, 2014, 04:44 AM
There are a few Wang enthusiasts in Europe. I will get the contact info.

acollins22
August 12th, 2014, 10:23 AM
Thanks for the replies Folks.

Picking up on the VS85 idea I've done a bit of searching and the big boards do look right.

m_thompson... Any leads could be helpful. I don't collect Wang and my main interest was in saving them from the recycler.


Cheers,

Andy.