View Full Version : Working with image files...

October 24th, 2014, 11:24 AM
I have an image (.IMG) file from a 1.44 disk that I want to write to a 1.2 disk. Size is not a problem -- the entire contents of the 1.44 disk will fit on a 1.2 disk. Is there a way to do this? If so, how? Alternatively I can re-image the 1.44 disk if that would facilitate the transfer to the 1.2 disk.

October 24th, 2014, 12:12 PM
Winimage has an option to change the size of an image which then could be written out on a lower capacity diskette.


October 24th, 2014, 12:20 PM
Winimage is what I would use.

October 24th, 2014, 01:47 PM
Yep, WinImage is your best bet. :)


October 24th, 2014, 03:48 PM
Worked a treat! Thanx, guys. I wanted a copy of Chuck's AMI Diags on a 1.2 disk as well as its native 1.44 disk. Some of us still have systems that boot from 5" floppies, you know. :-) I used Boot_B in my A drive and the 1.44 AMI disk in the B drive and could always change the floppy boot sequence in the CMOS setup but a direct boot from native drive A is what I wanted.