PDA

View Full Version : See if you can figure THIS out...



Kaptain Skitzo
December 7th, 2003, 05:39 AM
We tore apart my Amiga 3000, replaced the 3.1 ROMs, swapped out everything from the SCSI side of the machine; CIAs, DMAC, Paula, SCSI chip, one or two more, and it still wouldn't boot from the HD.
Dropped in a 2091 card, and it booted fine(although it's showing 2 data partitions as unformatted....that's not good)...well, after fighting with it a little.
All connections were fine, chips seated in nice and tight.

Is the machine haunted?