PDA

View Full Version : Question about ASTEC 200 Watt Power Supply Model AA14220



nc_mike
May 26th, 2016, 04:15 PM
Does anyone know if this PSU is put into a 5160, will it drop right in and be secured by the same screws etc, and, it looks like it has a lip on one site - will that lop conflict with Slot 8 or will slot 8 still be accessible/usable?

Regards,
Mike

SpidersWeb
May 26th, 2016, 04:27 PM
If you mean this (or something similar): http://www.ebay.com/itm/ASTEC-200-Watt-Power-Supply-Model-AA14220-Pulled-from-a-386-DELL-310-Computer-/112001685061?hash=item1a13d21645

Then no, the rear fan / power connectors wont line up with the rear of the case.

nc_mike
May 26th, 2016, 04:29 PM
If you mean this (or something similar): http://www.ebay.com/itm/ASTEC-200-Watt-Power-Supply-Model-AA14220-Pulled-from-a-386-DELL-310-Computer-/112001685061?hash=item1a13d21645

Then no, the rear fan / power connectors wont line up with the rear of the case.


Thanks!
Mike