View Full Version : Voyetra Sequencer Plus Gold: Sound blaster drums

May 30th, 2016, 11:05 AM
I'm trying to add a drum track to something I'm working on using Voyetra's sequencer but I cant seem to get any of the drum sounds to work. I'm using a sound blaster 16 and I followed what the manual told me to do, which is set the drum track to channel 10, port 2 and program 126, however I get nothing, no sound at all when I try to put midi through this way. Every other track works fine but of course those are regular instruments and not percussion sounds. Am I missing something? Anyone have experience with this program and know what to do?

October 16th, 2016, 12:42 PM
Bringing this one back from the dead with an answer!

I had the same problem, using 10, port 2, and program 126. The manual says to do that right?

Well if you load up the demo song (if you have one) the drums are on Port 2, channel 16, and port 126.

Here's a video of my sequencer running with the drums in action, (track 7) :


October 16th, 2016, 06:50 PM
Does that sequencer use Voyetra's SuperSAPI drivers by any chance? They were weird in that the percussion channel was on Ch. 16, even in Windows!