PDA

View Full Version : Adaptec EZ-SCSI Utility



the731272
June 9th, 2016, 03:11 PM
Hey everyone!

So, currently I'm working on attempting a project that involves an AST 486, an Adaptec AHA-1540B, and a lack of software. I'm looking for Adaptec's EZ-SCSI utility, preferably version 3 or above, as Adaptec (Now owned by Microsemi?) Either don't list it anymore, or don't provide it at all. Third party sites like WinworldPC host it, but only disk 1 of ANY of the versions they have. So, I reach out to anyone who has this software, can you provide it to me? Thanks in advance for any help.

Stone
June 9th, 2016, 04:10 PM
I see Amazon has EZ-SCSI Deluxe Edition 5.0 for $9.99.

the731272
June 9th, 2016, 04:16 PM
Thank you for the tip-off, but I would like to not money if at all possible.

Chuck(G)
June 9th, 2016, 04:54 PM
EZ-SCSI has/had many versions, including CD-based ones. Are you looking for DOS or Windows NT or Netware drivers?

I've got several EZ-SCSI disks, just trying to identify which you need.

Stone
June 9th, 2016, 04:54 PM
I believe there's another place that offers it (for free) but I don't think Forum rules allow me to mention it.

the731272
June 9th, 2016, 05:00 PM
The Windows 9x version. (95 specifically.) Should have said that originally, my mistake.

the731272
June 9th, 2016, 05:16 PM
Okay so, I changed my google search keyword to not include the version number, and I found it hosted on a different site on the first page!
I'm going to try installing that version (4.01) now. facepalm

the731272
June 9th, 2016, 05:46 PM
I do need the install CD for version 4.01 apparently.

modem7
June 10th, 2016, 03:28 AM
I do need the install CD for version 4.01 apparently. In case you did not see the indication (it is poor), you have a private message.