PDA

View Full Version : Having issues using XTIDE bios on a DTK286



soviet9922
March 12th, 2017, 12:14 PM
Hi have been getting restored a DTK286 i found next to trash container, have a hard time getting rid of all the damn cockroaches that where living inside of it.

Now i have a problem using XTIDE BIOS i donīt have found before in any other systems.
If i turn on the system and have no ide drives connected the xtide bios shows fine and allow to boot from the floppy drive.
If i have any IDE drive connected, shows ok on the XTIDE BIOS but after detecting the hard drives the system donīt try to boot from floppy or hard disk.
Iīm using a network card and the 8k XTIDE version, tried the 286 small and also the 8086 small but the problem is the same.

PICTURES:
https://thumb.ibb.co/jS7NVa/11f02b2e_7427_45d4_8ce5_86e64cf8d279.jpg (https://ibb.co/jS7NVa) https://thumb.ibb.co/eA0bqa/65be080e_b511_4f8b_a126_9a31ad596dfc.jpg (https://ibb.co/eA0bqa) https://thumb.ibb.co/hHiJ3v/02338bb0_757d_4650_891a_62aa1f219446.jpg (https://ibb.co/hHiJ3v) https://thumb.ibb.co/kzXpAa/b61f33f3_dc6c_4902_81be_207e2b4d87d6.jpg (https://ibb.co/kzXpAa) https://thumb.ibb.co/dfo1Ov/e135962e_f11e_47d0_abc4_8ac6fd57d011.jpg (https://ibb.co/dfo1Ov)

pearce_jj
March 12th, 2017, 02:00 PM
Try a newer build.

http://www.xtideuniversalbios.org/binaries/