PDA

View Full Version : JUKO M16 8bit ISA Multi I/O Controller Card



pivanow
June 8th, 2017, 07:25 AM
I've just bought this JUKO M16 8bit ISA Multi I/O Controller Card, but there isn't any documentation about it over the internet. I would like to know if this card would be apropriate to use a 720k or 1.44mb floppy drive in my PC XT.

http://www.ebay.com/itm/262960322187

Does anybody have any documentation about this card? A manual, a features list?

Thank you.

lucasdaytona
June 8th, 2017, 06:03 PM
Here, looks like that card:
http://th99.classic-computing.de/src/i/I-L/50254.htm

720k will probably be ok, 1.44MB could be a problem... This card have a BIOS, this could be a good thing. Do you already have a floppy controller in you PC XT? Is your PC XT a clone? Do you have another vintage computer to test things?

Good luck.

Robin4
January 1st, 2018, 11:17 AM
All formats 360KB, 720KB, 1.44MB, 1.2MB should work fine.. I have two of those cards. You have to set the drives with the first startup.. There is a command to enter the bios settings how to set it up..
If done the config should stay on the card on every boot..