View Full Version : Biostar MB-1433/50UCV-D CPU support question

August 2nd, 2017, 04:11 PM
Ive got a Biostar MB-1433/50UCV-D identical to the one in the photo in the link below.
Odd thing is that my board along with the one in the link is missing the jumpers to set the voltage down to 3.3V to run a DX4-100 CPU.

It will take a 100 MHz CPU according to the manual, but im wondering if there are some variants of the board perhaps?

Is my only option to find an overdrive CPU with an onboard regulator?
As you can see in the photo in the link, like my board there is no visible voltage regulator, nor is there any jumpers to set the CPU voltage.

TIA for any help.