PDA

View Full Version : Mark-8 backplane connectors



Corey986
October 18th, 2018, 05:29 AM
Does anyone know the specs on the connector that you can use to hook up Mark-8 boards to create a backplane? I am traveling so I donít have access to the boards but want to grab some connectors at one of the surplus stores in Silicon Valley before I leave.

And yes I know most mark-8 were simply wired board to board but they were intended to use connectors and some owners did which makes troubleshooting a system a whole lot easier.

Thanks,
Cheers,
Corey

8008guy
December 13th, 2018, 08:05 PM
Hi corey,

Molex .156 spacing

I'll look and see if I have pictures and part numbers if you need them.

Len

8008guy
December 13th, 2018, 08:09 PM
There are some pictures here

http://www.8008chron.com/MARK8/

Corey986
December 16th, 2018, 12:59 PM
Hi corey,

Molex .156 spacing

I'll look and see if I have pictures and part numbers if you need them.

Len

Thanks.