Image Map Image Map
View RSS Feed

1980s_john

  1. Installing and running Kermit under CP/M on a Northstar Advantage

    Hi,

    Following are my notes explaining how to install Kermit from scratch, using a PC running Windows.

    The Advantage must have a serial (or SIO) board fitted, set up with the default DIL configuration headers (one sets port as a modem, other sets async mode).

    The Advantage has 6 slots for I/O boards, numbered from 1 (nearest to floppy) to 6. The default assignments in Advantage CP/M for serial devices are:

    LST: - board in slot 1, 9600 baud ...

    Updated December 27th, 2014 at 02:50 PM by 1980s_john (Added Set Binary mode)

    Categories
    Uncategorized