Image Map Image Map
View RSS Feed

All Blog Entries

  1. What a difference a day makes

    I have been trying to repair the corroded tracks of my Quadboard, but there are more than I originally thought. Having a look at ebay has bought a ram bare clone board to my attention for a very keen price. Given I have all the correct chips, its probably worth trying to see if that card will work first.

    Bezel of the 5160 has been glued and filled and now to spraying. I have found a great colour match in BMW mini pepper white but its the finish that might be difficult. I have given ...
    Tags: 5160, 911, ibm xt Add / Edit Tags
    Categories
    Uncategorized
  2. Projects building up again.

    A couple of months ago, I was worried that I was running out of projects, not now.

    My XT 5160 is a bit battered, but the bezel is glued back together and the case has been hammered back into about the right shape. Just need some car body filler to remove the surface defects then it will be time to paint. Not sure how to make the splatter, might experiment with nozzle modification of rattle cans. Reading up, a nozzle fitted with a short straw can be used to create a splatter.
    ...

    Updated July 21st, 2020 at 09:53 AM by Gary C

    Tags: 5160, ibm xt, multibus Add / Edit Tags
    Categories
    Uncategorized
  3. World of IBM, Intel multibus plus a new PDP 11 !

    My PCW9512 is sort of working and the Gotek is installed and was at a bit of a loss what to do next

    I managed to obtain a rack mount Micro PDP-11/73 that will need some care before powering up, but also saw a basket case 5160 on Ebay that was near enough to go and pickup, so went for it and now its mine

    The front bezel is split in two and the case is bent on the right hand side, just where the Hard Disk is , so that unit is very suspect, but hey ho.
    ...
  4. Tandy 2500 SX/20 and Tandy 4825 SX restoration thread

    I just dug out my old Tandy 4825 SX and want to max it out. Can anyone tell me what the largest hard drive this will support natively? Also could I use an AMD 5x86-P75 with it? There doesnít seem to be a way to change the FSB from 25 to 33MHz, but I canít remember if this vintage machine would just adjust automatically.

    Thanks!
    Categories
    Uncategorized
  5. Multibus & Amstrad PCW, what a pair

    Fitted my Gotek into the case by cutting the original badge, as it had been cut out to allow the original drive to be mounted as drive B, it was already missing, but still seems a shame to cut original stuff.
    On the plus side, with the OLED, the Gotek looks good and is useable.

    Been collecting some multibus cards for a few years now. Have a 286 processor card and a memory card. recently obtained a card frame, linear PSU and have been looking for a suitable 'vintage' looking ...
    Categories
    Uncategorized
Page 1 of 109 123451151101 ... LastLast