Originally Posted by lutiana Is that an MFM controller? If so I can dig through my small collection of the things and send you one or two that may or may not work for the cost of shipping if it helps. Yes it’s an MFM controller that also had the floppy controller built into it. That would be great if you had one.
I had a go at doing the ASR 33 chad bucket in CAD so you ought to be able to just print one off now. https://www.thingiverse.com/thing:3353088
Very groovy, but I think there's way more reason to implement the 6510. Clearly more units utilized the 6502. But you can still find them new on eBay from time to time.
Originally Posted by Chuck(G) Assuming that pin 1 stays high, it should be possible to "feed through" pin 8 to pin 12. But the solution ultimately will be figuring out why pin 1 stays high. Yeah that is is the goal for sure. I just want to prove out my theory a bit. After the experience with the TVT I don't trust schematics or circuit descriptions 100%. I did try feeding through but didn't see any text appear... although I didnt type anything so maybe it would only change new text being added. I'm ...
Originally Posted by pski It’s raining Model IIs! Get em whilst they can be gotten!