Vintage Computer Forum - Chuck(G)

Category Widget (bottom-up)

Chuck(G)

There is no available content written by Chuck(G)

Recent Article Comments Widget
Recent Forum Posts

I use those cases for a lot of my projects. They...

I use those cases for a lot of my projects. They typically list for around $39 but now and then Newegg will bump the price down to $19. I snapped up 4 of them just a few days ago. They are...
kc8eyt Today, 10:55 AM

I have a nicely-recapped (circa 2017) 1.8A...

I have a nicely-recapped (circa 2017) 1.8A DataPower-made Lisa PSU on my bench --- the ungrateful poodle is crowbarring for some reason. Lisas give you so many flavours of failures since all the...
stepleton Today, 10:54 AM

Also curious if your CPU is by chance known to be...

Also curious if your CPU is by chance known to be good, ie: tested in a known good working board??
chris_nh Today, 10:52 AM

Does the ST01 even need an IRQ under DOS? ...

Does the ST01 even need an IRQ under DOS? Seagate's dox say no.

If you don't use DHCP, can you still ping using naked IP addresses? I had to move my packet interrupt to 0x64; 0x60 didn't work...
Chuck(G) Today, 10:51 AM

I think the original tantalum capacitors were...

I think the original tantalum capacitors were 10uf ... maybe you don't have enough capacitance to keep things smooth? Also, I don't think you need the -5 to boot, so maybe try without it, just to...
chris_nh Today, 10:41 AM

All times are GMT -8. The time now is 10:57 AM.

Powered by vBulletin® Version 4.2.5
Copyright © 2021 vBulletin Solutions Inc. All rights reserved.

© 2002-2019 Vintage Computer Federation, all rights reserved