Nothing will happen, apart from a bad-sector check done by the drive, because the 386 can not bypass the IDE circuitry and that will simply not do a low-level format.
I had given up on any hopes to get it to work again at that point, so I just removed them to see where the bumper stop was.
In all honesty I didn't think of it at first when I removed them, as I...
Looks like I have already grabbed that. The 11/04 has been sitting there ever since I got it because I was told it had an intractable PSU issue, but I plan to take a look at it soon.
I looked at the refresh signals on the address muxes tonight. On the muxes themselves I connected the logic analyzer to the 7 refresh bits, the two mux control bits, and the 7 output bits for the...
Category Widget (bottom-up)
Recent Article Comments Widget
Recent Forum Posts
Nothing will happen, apart from a bad-sector...
Nothing will happen, apart from a bad-sector check done by the drive, because the 386 can not bypass the IDE circuitry and that will simply not do a low-level format.
Timo W. Today, 12:43 AM