Image Map Image Map

Search:

Type: Posts; User: dieymir

Page 1 of 7 1 2 3 4

Search: Search took 0.06 seconds.

  1. Worked for me in the limited testing I did. I...

    Worked for me in the limited testing I did. I used a Am386@40, though

    BTW, MTU is 1500 bytes
  2. You can try to reduce the MTU size to a "safe"...

    You can try to reduce the MTU size to a "safe" value (i.e. 576 bytes) and gradually increment it till you find the "sweet spot".
  3. I use IRQ 3. I was intrigued so I reconfigure the...

    I use IRQ 3. I was intrigued so I reconfigure the card to use IRQ 2 using RSET8019 without problems but the packet driver seems to assume that IRQ 2 == 9, which is true for an AT, but since IRQs on a...
  4. Both the packet driver and the config program...

    Both the packet driver and the config program work just fine here on a Turbo XT clone with a 8088-1 installed but with such old hardware nothing it's sure.

    I have attached here the very same ones...
  5. I have a no-name Realtek 8019as installed on a...

    I have a no-name Realtek 8019as installed on a 8088 xt clone The configuration program and packet driver work fine I also use it to hold a XUB + HD floppy PROM They are easy to find at very low cost
  6. Replies
    16
    Views
    1,011

    Just my two cents, a DOM (Disk on Module) will be...

    Just my two cents, a DOM (Disk on Module) will be more suited for this task. DOMs are straigforward IDE disk drive replacements, you can plug them directly to a 40 pin IDE connector and use a...
  7. The MEMMAP utility that someone mentioned: ...

    The MEMMAP utility that someone mentioned:
    ...
  8. Replies
    16
    Views
    736

    PS/2 stuff it's not uncommon but is slowly...

    PS/2 stuff it's not uncommon but is slowly fading. My interest on this project is due to the fact that all my KVMs have PS/2 connectors. No problem with keyboards but I need two mouses (one serial...
  9. My vote for this one. Another RFE: recursive...

    My vote for this one. Another RFE: recursive directory transfers (i.e. mget/mput -r <mydir>)
  10. Replies
    16
    Views
    736

    Another PS/2 Mouse ISA (ISA8) card adapter

    Just to make you know there is an ongoing effort to create a PS/2 to serial mouse adapter card at vogons:

    https://www.vogons.org/viewtopic.php?f=46&t=67488

    looks promising
  11. Replies
    29
    Views
    1,573

    You can try the following changes: CONFIG.SYS...

    You can try the following changes:

    CONFIG.SYS

    Change NOEMS for RAM in the line that loads EMM386
    Change the line: DOS=HIGH to DOS=HIGH,UMB
    Comment out the line that loads IFSHLP.SYS
    Change...
  12. Thanks a lot. There are lot of interesting things...

    Thanks a lot. There are lot of interesting things in that archive.
  13. Replies
    9
    Views
    3,068

    I don't know if you have solved the problem or...

    I don't know if you have solved the problem or not, but some time ago I uploaded the system disk for a Sharp PC-4500 to this site:

    http://vetusware.com/download/MS-DOS%203.21/?id=14921

    I do not...
  14. I have a no name network card with the same chip...

    I have a no name network card with the same chip (UK0022). Somebody on this forum modified the latest crynwr ne2k packet driver to work on 8-bit slots.
    ...
  15. I still remember a program that listed MS-DOS 5.0...

    I still remember a program that listed MS-DOS 5.0 as a requisite. Actually the program worked fine with any DOS version > 3.0 but it used about 600KB or RAM so they assumed that anybody using a...
  16. I use FreeDOS on 486 PCs with good results....

    I use FreeDOS on 486 PCs with good results. Everything I thrown at it but Windows 3.x works fine (win 3.x should work in standard mode but I did not have much luck with it). MS Network and LAN...
  17. I'm not aware of any software written...

    I'm not aware of any software written specifically for a particular DOS version. The minimal DOS version requirement for a huge amount of software (including Windows 3.x - WfW requires 3.3, though)...
  18. Replies
    9
    Views
    724

    The best one I know is BOOT.SYS from Hans...

    The best one I know is BOOT.SYS from Hans Salvisberg

    http://salvisberg.com/boot.sys
  19. Replies
    54
    Views
    5,377

    Poll: Yes, you are absolutely right but, back at those...

    Yes, you are absolutely right but, back at those pre MS-DOS 5.0 days, every single 386 I saw in the wild was a 386SX@16 (usually an Olivetti specimen). 386(DX) were really expensive and I started to...
  20. Replies
    54
    Views
    5,377

    Poll: I try to use what I think are the "period"...

    I try to use what I think are the "period" correct DOS versions on my systems

    * XT clones (8088/V20): PC/MS-DOS 3.2x and DR DOS 3.40
    * AT clones (286): PC/MS-DOS 3.3x and DR DOS 3.41
    * 386SX:...
  21. Replies
    23
    Views
    2,005

    The problem is that old AMI BIOSes returned to...

    The problem is that old AMI BIOSes returned to 1900 at 01/01/2000 00:01 This happens with ALL post-2000 leap years not only with 2000. I did not explain this very well ... :(

    they even tried to...
  22. It's the version of BASICA that came with IBM DOS...

    It's the version of BASICA that came with IBM DOS 4.0. It should work fine too. But, as I said, there aren't many changes from version 3.30.
  23. Replies
    23
    Views
    2,005

    I'm surprising that a 486 BIOS has this problem...

    I'm surprising that a 486 BIOS has this problem ... Leap year bug is common (2000 it's a leap year) but I have several 286, 386 and 486 (all with different AMI (flex/win)BIOSes) and none of them have...
  24. Try another (older) version of BASICA. IBM DOS...

    Try another (older) version of BASICA. IBM DOS 5.0 was released at a time IBM was phasing out ROM BASIC and the version of BASICA included with it and OS/2 (it's the same: 3.40) relies much less in...
  25. Documentation of Tarbell BASIC is in archive.org:...

    Documentation of Tarbell BASIC is in archive.org:

    https://archive.org/details/bitsavers_tarbellTar_4162785

    but seems to be of an older version, though. I cannot see source code archived...
Results 1 to 25 of 170
Page 1 of 7 1 2 3 4