Image Map Image Map

Search:

Type: Posts; User: dippaolo

Search: Search took 0.00 seconds.

  1. I also used an adapter, the one my friend...

    I also used an adapter, the one my friend @ldkraemer showed. Works well.

    The tape I showed has the first straight connector. The second is interlaced. I used the first connector.

    I didn't do...
  2. I use such a cable. 64130 64131 I have an...

    I use such a cable.

    64130
    64131

    I have an encoder, a speaker pretending to be a mechanism, and an oled display. Flash floppy software.

    I have 3 gotek and they all work perfectly.
  3. Ram replaced. Bad ram is still there. I read...

    Ram replaced. Bad ram is still there.

    I read the diagram again. I checked the connection for 2 hours.

    I found one more error.

    U325 -> U109

    63999
  4. Replies
    3
    Views
    334

    Reprogram Gotek, load Flash Floppy. Flash...

    Reprogram Gotek, load Flash Floppy.

    Flash Floppy reads a lot of images. It is easy to use. You don't need to convert.
    I used 360K, 720K, 1.44M images. I used for Amiga 500, 600, 1200. I used for...
  5. FINE. I ordered the MSM41464-10 RAM (+socket...

    FINE.

    I ordered the MSM41464-10 RAM (+socket dil18) to start.

    I will replace the RAM. I will write what the test showed.
  6. Commodore PC 20 III "Bad ram at 8075D = 00h, expected = 00h"

    Error during startup:

    "Bad RAM at 8075D = 00h, expected = 00h."

    Which is the ram memory? Where to look for the cause?

    63903
  7. Partially repaired. A few years ago, I removed...

    Partially repaired.

    A few years ago, I removed the batteries. Now I have looked closely. I fixed two connections. The computer starts right away.

    However, I get the error "Bad ram at 8075D =...
  8. Yes, my computer needs to warm up :) Watch the...

    Yes, my computer needs to warm up :)

    Watch the video on first run:
    https://photos.app.goo.gl/qUbWJH8JoMamCNuc6


    Watch the video after a few minutes:...
  9. Replies
    3
    Views
    438

    Hello, I'm from Poland

    I have a lot of retro equipment. 8bit, 16bit, 32bit. Atari, Commodore, Nintendo, Consoles, Computer. I have 3 pinball machines, 1 arcade machine. And many other machines.

    I'm glad that I found my...
  10. Commodore PC 20 III works after 15 minutes

    My Commodore PC 20 III does not work after turning on. The monitor shows nothing. When I leave it on for about 15 minutes, turning it on again works fine.

    Supersoft / Landmark Diagnostic ROM's...
Results 1 to 10 of 10