Search:

Kaypro 4/84
S/N: 118870

I'm having an issue with my Kaypro 4/84 where initially the PSU did not seem to gave enough current/voltage to power up drive 2. Eventually after about 5 to 10 mins the drive would start working. The...

Here is my solution for a floppy quick connect/disconnect
65020650196502165022

I have another solution for a quick disconnect for drive cables...I'll try to get some photos of my home made solution this evening.

Philip

I'm curious...Did you use a program to help fault find the bad RAM?
My Sol 20 is playing up too, and I need to test the RAM, but not sure what memory test programs are available.

...but can you use a Northstar Horizon as a terminal for a Sol-20?

;-)

Hi, I'm looking for one for the following S-100 cards:

-CompuPro Interfacer 1 card
-Solid State Music SSM-IO4
-MITS 88-2SIO
-Processor Technology 3P+S

Thanks

Hi inguz, let me look into that. Thanks.

or a SSM IO-4, or an compupro Interfacer 1 would also suit my needs.

Hi all,
I'm looking for a Processor Technology 3P+S card.
Please let me know if you have one available.

Thanks

Hi all,
I'm looking for a Processor Technology 3P+S card.
Please let me know if you have one available.

Thanks

Wonderful!

hi jafir,
Yes, the mouse works fine on my 486 in DOS or wWindows 3.1. I just tried that version of the logitech driver (I've tried others), still no go. "Mouse is not responding" so driver doesn't...

Unfortunately my only adaptor also changes gender. Yes, 100% sure I'm using the RS332 port.
Thanks!

Hi, thanks for the reply. Yes, ctmouse was one of the first ones I tried, and the one that I'm using for the MS mouse...works very well. After it launches it accurately detects wether the mouse that...

I have an old Zenith Laptop ZFL-181-93 which has a single DB25 RS232 serial port.
I recently decided to hook up one of my Logitech compatible mice (Dexxa brand - I have a couple and have tested them...

Thanks, I'll check it out.

Looking for an Apple II+ case badge

Thanks!

Oh..that doesn't sound good.
Hope you can get the Sol-20 keyboard project off the ground.

Hi Dave,
Welcome to the SOL-20 club.
Don't forget the OSI though ;-)

Phil

Ha!
Well that was too easy.
I grounded pin 34 and it worked first time.
Much thanks!!!

Hi Chuck..Thanks for the info. I'll look into that and let you know what I find.

Can anyone help?

My system is a SD SBC200 with Versafloppy2 floppy disk controller. It also has a Vector Graphic flashwriterII board for video output, and a Expandoram 2 card. With a Vector...

Get a Gotek +Flashfloppy and a 34 to 50 pin adaptor and no worries about flakey ancient media.
:-)

Ooops, I lied...It's an SBC200