Search:

I also used an adapter, the one my friend @ldkraemer showed. Works well.

The tape I showed has the first straight connector. The second is interlaced. I used the first connector.

I didn't do...

I use such a cable.

64130
64131

I have an encoder, a speaker pretending to be a mechanism, and an oled display. Flash floppy software.

I have 3 gotek and they all work perfectly.

Ram replaced. Bad ram is still there.

I read the diagram again. I checked the connection for 2 hours.

I found one more error.

U325 -> U109

63999

Reprogram Gotek, load Flash Floppy.

Flash Floppy reads a lot of images. It is easy to use. You don't need to convert.
I used 360K, 720K, 1.44M images. I used for Amiga 500, 600, 1200. I used for...

FINE.

I ordered the MSM41464-10 RAM (+socket dil18) to start.

I will replace the RAM. I will write what the test showed.

Error during startup:

"Bad RAM at 8075D = 00h, expected = 00h."

Which is the ram memory? Where to look for the cause?

63903

Partially repaired.

A few years ago, I removed the batteries. Now I have looked closely. I fixed two connections. The computer starts right away.

However, I get the error "Bad ram at 8075D =...

Yes, my computer needs to warm up :)

Watch the video on first run:
https://photos.app.goo.gl/qUbWJH8JoMamCNuc6


Watch the video after a few minutes:...

I have a lot of retro equipment. 8bit, 16bit, 32bit. Atari, Commodore, Nintendo, Consoles, Computer. I have 3 pinball machines, 1 arcade machine. And many other machines.

I'm glad that I found my...

My Commodore PC 20 III does not work after turning on. The monitor shows nothing. When I leave it on for about 15 minutes, turning it on again works fine.

Supersoft / Landmark Diagnostic ROM's...