Image Map Image Map
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Action Computer Enterprise, Inc. Discovery 500

  1. #1

    Default Action Computer Enterprise, Inc. Discovery 500

    Here are some pictures of an ACE Discovery 500 Multiprocessor. It's a Z80 system (with multiple z80 chips on 2 processor/RAM cards.)



    http://vintagecomputer.net/ace/

    It's a later S-100 system with a non S-100 drive controller. The hard drive appears fried (unless screaming platter scratching sounds = great!). It was so bad my 2 year old daughter started to cry and my wife made me turn the thing off!




    Anyway...The system will boot up and search for OS on the drive and then the hard drive. Anyone have the boot disk or installation software for one of these? Assuming that there is no software available, I am hoping that because it's an OEM-type system it'll be possible to build a working BIOS for it. Maybe it'll boot Xerox 820-II disks, wouldn't that be a hoot.

    Action Computer Enterprise, Inc. did a lot of business in China, so there may be parts/software in Asia. There are additional links on my web site here:
    http://vintagecomputer.net/browse_thread.cfm?id=230

    Bill
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

  2. #2

    Default 1983-84 ACE Discovery 500 Multiprocessor Ads

    I just found some ads, confirming that the system was first available in Oct/November 1983, through the first months in 1984. After that, there are no ads, but that does not mean the system did not continue to be produced, especially for sale in China.

    http://www.vintagecomputer.net/ace/A...very500Ads.pdf

    bd
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

  3. #3
    Join Date
    Jan 2007
    Location
    Pacific Northwest, USA
    Posts
    34,344
    Blog Entries
    18

    Default

    Bill, I'll look around--I still may have a disk to an ACE Alloy 66. 8", SS MFM, 16x512 byte sectors per track according to my notes. Don't know if it'd work in your system, though.

  4. #4

    Default

    According to the ads (link above) the 500 is in some form compatible with CP/M, PC DOS, and Concurrent DOS. I *hope* the PROM does the BIOS work before reading disks, and loads some sort of universal bootstrap into memory so that it can read any kind of disk from this period. And I'd like mayo on that too. I am not holding my breath, but I do plan to try some random boot disks once I have determined that the system has a clean disk drive.
    bd
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

  5. #5
    Join Date
    Jan 2007
    Location
    Pacific Northwest, USA
    Posts
    34,344
    Blog Entries
    18

    Default

    Looking at the Alloy files, it seems that ACE mostly made their boxes out of commodity components and did very little other than the CPU cards themselves. For example, the Alloy66 uses a Tarbell disk controller. Your Discovery uses a DTC 520A ST412/floppy to SASI bridge. That should make your job much easier.

  6. #6

    Default

    Anyone have a CP/M Plus disk? I wonder if a Televideo CP/M boot disk will work..hmmm.
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

  7. #7
    Join Date
    Jan 2007
    Location
    Pacific Northwest, USA
    Posts
    34,344
    Blog Entries
    18

    Default

    Quote Originally Posted by billdeg View Post
    Anyone have a CP/M Plus disk? I wonder if a Televideo CP/M boot disk will work..hmmm.
    You'll still need a CBIOS that works with that system--the chances that any of the usual suspects will work is pretty close to nil.

    However, the boot ROM has everything you need to know to write your own BIOS. It does console I/O and it obviously can do disk I/O. Dump it, disassemble, and go from there.

  8. #8

    Default

    Hi.

    I was just wondering what something like this is worth!?! I've been holding onto my Discovery 500 since about 1987. I got it at a garage sale from a retired electronics engineer. I have two Wyse-50 terminals for it. It boots up and runs great. I even compiled some simple programs with the CP/M C compiler on one of the Z-80 slave processors. I have extra cables and the original manuals and floppies, and even a spare hard drive for it that doesn't look like it's been used. It came with an original Centronix serial printer, with cables, extra ribbons, and manual.

    Over all, the system seems to be in great condition. I just don't know what to do with it, since I know I'll never make the time to play around with it ever again. I've always kept it in my closet, protected by other boxes full of Commodore 8-bit stuff.

    I sold an IMSAI 8080 w/8" floppy drives a few years back for $500, so that started the gears spinning in my head about what this system might be worth. Any ideas? Would eBay be a good place to list it, or do other vintage computer classifieds exist?

    Thanks,
    -Derek

  9. #9

    Default

    haha what a blast from the past... i used to work at ace... it was a GREAT place to work until the chinese bought it... not that the chinese were bad... but nobody listened to us "kids" in the R&D department and the ibm pc network card pretty much matched the benefits of our much more expensive machines... i was the guy who built the final o/s and utility disk configurations that got sent out with our computers... wrote bios drivers and utils in c and asm... good times ;o)

    ~DC
    http://

  10. #10

    Default

    I am still looking for a copy of an ACE Discovery 500 boot/util disk. I can supply the disks, a return mailer, etc. All you have to do is make the copy and mail it back...please?????
    Bill
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •