Image Map Image Map
Results 1 to 4 of 4

Thread: IBM 360-era supplemental control panel device

  1. #1

    Default IBM 360-era supplemental control panel device

    OK. I could not resist this from a recent Ebay auction. Now, what the heck is it?


    Note that there are two rows of 18 DISPLAY lights with a set of 18 3-way toggle switches below them. The IBM 360 was a 36 bit word machine (18x2)


    The inside of the unit reveals a set of IBM Solid Logic Technology (SLT) chips.

    Here is my theory - This is a device used for validating data or comparing data before and after passing through from one unit to another. I know that back then IBM had large I/O controller units that would help bridge more than one 360 processing unit, or multiple storage unit. They may have needed to verify when a new piece was installed correctly, and that the data was not accidentally reversed (cabled backwards) I am thinking that IBM used these to help analyze the data, perhaps allowed him to single step through a program.

    I should add that this was purchased from a seller who also owned an IBM 360 front panel.

    Anyone have any theories? I have plenty more pictures here:
    http://vintagecomputer.net/browse_thread.cfm?id=345
    http://vintagecomputer.net/ibm/360/
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

  2. #2

    Default

    you should ask on the cctalk list, i'm certain someone will have a good suggestion. Your theory sound pretty believable though, with all them input wires. Maybe it was used for some kind of fault monitoring/tolerance. Perhaps an early version of a logic analyser.
    Looking for: anything from SGI or DEC/digital
    Pictures of my collection: www.pdp8.se

  3. #3

    Default

    Actually the 360's were 32 bit words Univac 1100's were 36 bit.
    Can you post a photo of some of the labels under the switches? Quite often the mainframes of the day had diagnostic/exerciser boxes. Even the 1700 series keypunches from Univac had a box with toggle switches so that we could 'exercise' the logic during troubleshooting

    Gerrit

  4. #4

    Default

    Here is a link to a highly detailed picture of the front panel.

    [urlhttp://vintagecomputer.net/ibm/360/IBM360_SCP_front-6.JPG[/url]

    Thanks for setting me straight on the bit words, I looked it up and thought it was 36 bits for whatever reason, but double checking on Wikipedia and I see now it's 32 bits. Wonder how I made that mistake, oops.

    Bill
    @ BillDeg:
    Web: vintagecomputer.net
    Twitter: @billdeg
    Youtube: @billdeg
    Unauthorized Bio

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •