Image Map Image Map
Results 1 to 7 of 7

Thread: Maxoptix T3-1300 how best to connect?

  1. #1

    Default Maxoptix T3-1300 how best to connect?

    I have Maxoptix T3-1300.
    Advise which scsi pci controller to use better?

  2. #2
    Join Date
    Sep 2003
    Location
    Ohio/USA
    Posts
    6,260
    Blog Entries
    2

    Default

    Any of them should be fine as long as you have drivers for the operating system you plan on using. Those drives should all be native 50 pin SCSI and are not too demanding on the interface card.
    What I collect: 68K/Early PPC Mac, DOS/Win 3.1 era machines, Amiga/ST, C64/128
    Nubus/ISA/VLB/MCA/EISA cards of all types
    Boxed apps and games for the above systems
    Analog video capture cards/software and complete systems

  3. #3

    Default

    Where can I download the manual Maxoptix T3-1300?

  4. #4
    Join Date
    Jan 2007
    Location
    Pacific Northwest, USA
    Posts
    24,740
    Blog Entries
    20

    Default

    The manual may be hard to come by for a 25-year old drive, but archive.org does keep a list of app notes.

    As far as PCI SCSI adapters go, it's hard to go wrong with an Adaptec 2940.

  5. #5

    Default

    Quote Originally Posted by Chuck(G) View Post
    The manual may be hard to come by for a 25-year old drive, but archive.org does keep a list of app notes.

    As far as PCI SCSI adapters go, it's hard to go wrong with an Adaptec 2940.
    Thank you.
    Adaptec 2940 Does the driver Windows XP exist? On the official website there is no information on this.

  6. #6
    Join Date
    Jan 2007
    Location
    Pacific Northwest, USA
    Posts
    24,740
    Blog Entries
    20

    Default

    Windows XP incorporates the 2940 driver in its standard driver set. As I said, the card is/was very common--common enough the MS doesn't bother with demanding that the user supply a driver.

  7. #7

    Default

    Thank you all for your answers.
    I have Adaptec AHA-2940UW and 50-pin SCSI Internal Flat Ribbon Cable.
    And do I need a terminator for plugging in 50 pins? How to connect correctly?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •