Image Map Image Map
Results 1 to 5 of 5

Thread: Charles River Data System "Universe 68" System mini-mainframe system

  1. #1
    Join Date
    Feb 2005
    Location
    Southern California 92656
    Posts
    72

    Default Charles River Data System "Universe 68" System mini-mainframe system

    Hi,
    I'm trying to sell my neighbors old mini-mainframe system from the early 1980's.

    The system is very clean, and was maintained regularly when in use in the 80's.
    Let me know if you're interested, or have any recommendations.

    -- Charles River Data System "Universe 68" System
    -- Century Data System [AMS 571] storage drive 615MB HD
    -- Cipher Cache Tape [M990] Tape Drive with tapes

    -- 3 Wyse 50 monitors with keyboards
    -- Cables, etc, and *all factory manuals*.

    This systems has an 8-inch floppy, 615MB hard drive, and tape back-up.

    Here's some PDFs from the internet:

    http://www.1000bit.it/ad/bro/charles...temCompSys.pdf
    http://www.1000bit.it/ad/bro/charles...m-Universe.pdf

    Actual system pics available here:
    http://oldcomputers.net/crds/pic1.jpg
    http://oldcomputers.net/crds/pic2.jpg
    http://oldcomputers.net/crds/pic3.jpg
    http://oldcomputers.net/crds/pic4.jpg
    http://oldcomputers.net/crds/pic5.jpg
    http://oldcomputers.net/crds/pic6.jpg
    http://oldcomputers.net/crds/pic7.jpg
    http://oldcomputers.net/crds/pic8.jpg
    http://oldcomputers.net/crds/pic9.jpg
    http://oldcomputers.net/crds/pic10.jpg
    http://oldcomputers.net/crds/pic11.jpg
    http://oldcomputers.net/crds/pic12.jpg

  2. #2

    Default

    The PDF URLs are, uh, pre-shortened.

    http://www.1000bit.it/ad/bro/charles...m-Universe.pdf
    I use my C128 because I am an ornery, stubborn, retro grouch. -- Bob Masse
    Machine room: http://www.floodgap.com/etc/machines.html

  3. #3

    Default

    I'd love to be proved wrong, but I did research on Charles River some years ago. It used to be advertised in the Electronics and Computer magazines in the 1980's. But in 201x I could never find any good information sources, particularly on the UNOS Operating System

    https://en.wikipedia.org/wiki/UNOS_(operating_system)

    So it remains a very rare machine to me, but equally then I propose one without any support!

    You can of course go down the eBay route for sales, just stick to your guns re pricing! Presumably this machine retailed at well over 10K USD at time of purchase. Does it start and is all the software available etc. Usual stuff.

    regards mb.

  4. #4
    Join Date
    Feb 2011
    Location
    NorthWest England (East Pondia)
    Posts
    2,053
    Blog Entries
    10

    Default

    I suspect that the terminals and tape drive are more saleable, and so worth more, than the rest of the system, which would only have a niche market. It might be worth talking to CHM but even they have limited storage space. Have you tried posting on CCTALK ?
    Dave
    G4UGM

    Looking for Analog Computers, Drum Plotters, and Graphics Terminals

  5. #5
    Join Date
    Jul 2009
    Location
    Boulder , Colorado USA
    Posts
    3,006

    Default

    Hi All;

    I have the same basic system, and I have wanted to sell mine but, I have not tried very hard..
    Also, mine has a Floppy controller issue now, at present..
    I have all of the manuals..
    I had tried a few years ago to get into their Private Group, but to no avail, it seemed to be for Employees only of that defunct company..

    THANK YOU Marty

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •