Image Map Image Map
Results 1 to 4 of 4

Thread: RL11 and RL02 Question

  1. #1

    Default RL11 and RL02 Question

    Hi,

    I started thinking to put in my 11/45 emulated hard drives. For now RL02 seems to be correct as I can find disk images ready to use. In the documentation of RL11 I read this :
    "RL11 Is a mass storage with a capacity of 5 to 20Mo." Something is not clear here : Only 20Mo , why not 40Mo ? A RL02 can contains around 10Mo and we can put 4 RL02 on a RL11, correct ? I am wondering if there is a limitation with RL02 ..With 4 disks do we must mix RL01 and RL02 or is possible to put 4 identical drive ? In this case ok with 4 RL01 (4*5Mo) but not with 4 RL02... Is somebody can clarify this point ?
    Thanks.

  2. #2
    Join Date
    Mar 2017
    Location
    New Jersey, USA
    Posts
    477

    Default

    Which documentation are you looking at? I suspect that it is only accounting for the RL01. The documentation I'm looking at says the total capacity is up to 40MB, and implies that RL01 and RL02 drives can be freely mixed on an RL11 controller.

  3. #3

    Default

    I found this in EK-ORL11-TD-001 . I am now sure that it is a mistake as I found in a other documentation the fact that we can have 40Mo using 4xRL02 .
    Anyway, I am wondering now if we can use 2 RL 11 in a system. It seems to be possible with configuring correctly jumpers on board. But is this something common?

  4. #4
    Join Date
    Mar 2017
    Location
    New Jersey, USA
    Posts
    477

    Default

    I can't say how common it might have been, but the documentation indicates it's possible.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •