Image Map Image Map
Results 1 to 6 of 6

Thread: System General SGUP-85 Universal Programmer

  1. #1

    Default System General SGUP-85 Universal Programmer

    G'day

    New to the forum, but have been lurking for a little while.

    I recently picked up a System General SGUP universal Programmer for a really good price (nothing).

    I am trying to find some info on device as well as some software to link it to my computer.

    Unfortunatly the pickings of information out there is very slim.

    I was hoping someone on this forum may have one or at least seen/heard of one and may be able to point me in the right direction.

    Thanks.

    Jamie

  2. #2

    Default Sgup-85

    Still no luck, even tried e-mailing the manufacturer. No joy.

    Adding a picture to maybe help jog any memories.

    Jamie
    Attached Images Attached Images

  3. #3

    Default

    Hi Jamie

    I have just seen your post, hope it is not too late. I have an SGUP-85 that cost me just the same as yours, I rescued it from going in a skip. Fortunately I used it at work so have a copy of the software and the pinout for the RS-232 lead if you are interested (although I suspect it is a standard lead).

    Email me if you want a copy of the software, it runs under DOS and fits on a floppy. It was originally 5.25" but I converted it to 3.5"

    I lent it to a friend several years ago and just got it back tonight so I hope it still works. Funnily enough he had not done the job he borrowed it for so ould like it back next week.

    deltafred

  4. #4
    Join Date
    Sep 2015
    Location
    Northern California
    Posts
    1

    Default Sgup-85

    Quote Originally Posted by deltafred View Post
    Hi Jamie

    I have just seen your post, hope it is not too late. I have an SGUP-85 that cost me just the same as yours, I rescued it from going in a skip. Fortunately I used it at work so have a copy of the software and the pinout for the RS-232 lead if you are interested (although I suspect it is a standard lead).

    Email me if you want a copy of the software, it runs under DOS and fits on a floppy. It was originally 5.25" but I converted it to 3.5"

    I lent it to a friend several years ago and just got it back tonight so I hope it still works. Funnily enough he had not done the job he borrowed it for so ould like it back next week.

    deltafred
    Hi deltafred,

    I just came across your 5-year-old post in hopes that you still check in from time to time. I just rescued an SGUP-85 and would be grateful if you could send me a floppy image of the software (assuming that you still happen to have it after all this time).

    Many thanks in advance!

    -- TL

  5. #5

    Default

    Quote Originally Posted by Tom Lee View Post
    Hi deltafred,

    I just came across your 5-year-old post in hopes that you still check in from time to time. I just rescued an SGUP-85 and would be grateful if you could send me a floppy image of the software (assuming that you still happen to have it after all this time).

    Many thanks in advance!

    -- TL
    Did you ever get your hands on the software, I've been looking everywhere unfortunately the disc with mine is unreadable

  6. #6

    Default

    Has anyone managed to contact deltafred and get a copy of the software, I just can't get it anywhere
    Kind regards
    Jordan

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •