Announcement

Collapse

Forum etiquette

Our mission ...

This forum is part of our mission to promote the preservation of vintage computers through education and outreach. (In real life we also run events and have a museum.) We encourage you to join us, participate, share your knowledge, and enjoy.

This forum has been around in this format for over 15 years. These rules and guidelines help us maintain a healthy and active community, and we moderate the forum to keep things on track. Please familiarize yourself with these rules and guidelines.


Remain civil and respectful

There are several hundred people who actively participate here. People come from all different backgrounds and will have different ways of seeing things. You will not agree with everything you read here. Back-and-forth discussions are fine but do not cross the line into rude or disrespectful behavior.

Conduct yourself as you would at any other place where people come together in person to discuss their hobby. If you wouldn't say something to somebody in person, then you probably should not be writing it here.

This should be obvious but, just in case: profanity, threats, slurs against any group (sexual, racial, gender, etc.) will not be tolerated.


Stay close to the original topic being discussed
  • If you are starting a new thread choose a reasonable sub-forum to start your thread. (If you choose incorrectly don't worry, we can fix that.)
  • If you are responding to a thread, stay on topic - the original poster was trying to achieve something. You can always start a new thread instead of potentially "hijacking" an existing thread.



Contribute something meaningful

To put things in engineering terms, we value a high signal to noise ratio. Coming here should not be a waste of time.
  • This is not a chat room. If you are taking less than 30 seconds to make a post then you are probably doing something wrong. A post should be on topic, clear, and contribute something meaningful to the discussion. If people read your posts and feel that their time as been wasted, they will stop reading your posts. Worse yet, they will stop visiting and we'll lose their experience and contributions.
  • Do not bump threads.
  • Do not "necro-post" unless you are following up to a specific person on a specific thread. And even then, that person may have moved on. Just start a new thread for your related topic.
  • Use the Private Message system for posts that are targeted at a specific person.


"PM Sent!" messages (or, how to use the Private Message system)

This forum has a private message feature that we want people to use for messages that are not of general interest to other members.

In short, if you are going to reply to a thread and that reply is targeted to a specific individual and not of interest to anybody else (either now or in the future) then send a private message instead.

Here are some obvious examples of when you should not reply to a thread and use the PM system instead:
  • "PM Sent!": Do not tell the rest of us that you sent a PM ... the forum software will tell the other person that they have a PM waiting.
  • "How much is shipping to ....": This is a very specific and directed question that is not of interest to anybody else.


Why do we have this policy? Sending a "PM Sent!" type message basically wastes everybody else's time by making them having to scroll past a post in a thread that looks to be updated, when the update is not meaningful. And the person you are sending the PM to will be notified by the forum software that they have a message waiting for them. Look up at the top near the right edge where it says 'Notifications' ... if you have a PM waiting, it will tell you there.

Copyright and other legal issues

We are here to discuss vintage computing, so discussing software, books, and other intellectual property that is on-topic is fine. We don't want people using these forums to discuss or enable copyright violations or other things that are against the law; whether you agree with the law or not is irrelevant. Do not use our resources for something that is legally or morally questionable.

Our discussions here generally fall under "fair use." Telling people how to pirate a software title is an example of something that is not allowable here.


Reporting problematic posts

If you see spam, a wildly off-topic post, or something abusive or illegal please report the thread by clicking on the "Report Post" icon. (It looks like an exclamation point in a triangle and it is available under every post.) This send a notification to all of the moderators, so somebody will see it and deal with it.

If you are unsure you may consider sending a private message to a moderator instead.


New user moderation

New users are directly moderated so that we can weed spammers out early. This means that for your first 10 posts you will have some delay before they are seen. We understand this can be disruptive to the flow of conversation and we try to keep up with our new user moderation duties to avoid undue inconvenience. Please do not make duplicate posts, extra posts to bump your post count, or ask the moderators to expedite this process; 10 moderated posts will go by quickly.

New users also have a smaller personal message inbox limit and are rate limited when sending PMs to other users.


Other suggestions
  • Use Google, books, or other definitive sources. There is a lot of information out there.
  • Don't make people guess at what you are trying to say; we are not mind readers. Be clear and concise.
  • Spelling and grammar are not rated, but they do make a post easier to read.
See more
See less

sanyo mbc-1250

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JonB
    replied
    I'd be happy to buy bit from you but I'm in the UK..

    Leave a comment:


  • ldkraemer
    replied
    Here are some images for Sanyo.


    http://oldcomputers-ddns.org/public/...nyo/index.html


    mbc1200.td0 108,054 2014/3/24 [00:00:00] DSQD - SANYO MBC-1200 CP/M 2.2 SYSTEM DISK V1.5
    mbc2000s.td0 151,386 2014/3/24 [00:00:00] SSQD - SANYO MBC-2000 CP/M 2.2 SYSTEM DISK
    mbc2000u.td0 163,374 2014/3/24 [00:00:00] SSQD - SANYO MBC-2000 CP/M 2.2 UTILITIES DISK
    mbc3000.td0 392,524 2014/3/24 [00:00:00] DSDD8 - SANYO MBC-3000 CP/M 2.2 SYSTEM DISK
    mxo-sy21.zip 10,880 2014/3/24 [00:00:00]
    san555.td0 208,126 2014/3/24 [00:00:00] DSDD - SANYO 555 MSDOS 2.11 SYSTEM DISK
    sanyocom.zip 16,736 2014/3/24 [00:00:00]
    smbc1000.td0 111,946 2014/3/24 [00:00:00] DSDD - SANYO MBC-1000 CP/M 2.2 SYSTEM DISK
    smbc1100.td0 101,060 2014/3/24 [00:00:00] DSDD - SANYO MBC-1100 CP/M 2.2 SYSTEM DISK
    smbc1200.td0 114,222 2014/3/24 [00:00:00] DSQD - SANYO MBC-1200 CP/M 2.2 SYSTEM DISK V1.3

    Download the .td0 files you want, then download the Imagedisk Ver1.18 from Dave Dunfield's website.
    It includes utilities like TD02IMD, IMDA, IMDU, IMDV, BIN2IMD, ANY2IMD, DMK2IMD, and TESTFDC.

    Create a batch file named A.BAT that contains:
    Code:
    TD02IMD smbc1100.td0 > SMBC1100.TXT
    
    IMDA SMBC1100.IMD >> SMBC1100.TXT
    
    IMDU SMBC1100IMD SMBC1100.RAW /B /E /D >> SMBC1100.TXT
    Then run the A.BAT file on the DOS Computer that has the correct Floppy Attached. Note that
    TELEDISK and IMAGEDISK (IMD) are DOS programs that run on an older DOS Computer.

    Read through the SMBC1100.TXT file as it will give you lots of information on the image.

    Code:
    TD 1.4 5.25 LD MFM S-step, 2 sides ADV
    80 tracks, 1280 sectors converted.
    
    
    IMageDisk Analyzer 1.18 / Mar 12 2012
    IMD TD 1.4 5.25 LD MFM S-step, 2 sides ADV
    
    Required cylinders: 40
    Required heads : 2
    Data rate : 250kbps
    Est. maximum track: 5541 bytes
    
    Possible drives/options to write SMBC1100.IMD :
    
    5.25" DD 40-track
    Double-step: OFF
    
    5.25" QD 80-track
    Double-step: ON
    
    5.25" HD 80-track
    Double-step: ON
    250 kbps -> 300 kbps
    
    3.5" DD 80-track NOTE: *1
    Double-step: OFF
    
    3.5" HD 80-track NOTE: *1
    Double-step: OFF
    
    *1 40 track image will use only first 1/2 of 80-track drive.
    
    
    IMageDisk Utility 1.18 / Mar 07 2012
    IMD TD 1.4 5.25 LD MFM S-step, 2 sides ADV
    
    Assuming 1:1 for Binary output
    0/0 250 kbps DD 16x256
    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
    D D D D D D D D D D D D D D D D
    0/1 D D D D D D D D D D D00 D00 D00 D00 D00 D00
    1/0 D D00 DE5 D D00 DE5 D D00 D D D00 D DE5 D D DE5
    1/1 D D D D D D D D D D D D D D D D
    2/0 D D D D D D D D D D DE5 D D DE5 D D
    2/1 D DE5 D D DE5 D D DE5 D D DE5 D D DE5 D D
    3/0 D D D00 D D D00 D00 D D00 D00 D D00 D00 D D00 D00
    3/1 D D D D D D D D D D D D D D D D
    4/0 D D D D D D D D D D D D D D D D
    4/1 D DE5 DE5 D DE5 DE5 D DE5 D DE5 DE5 D DE5 DE5 DE5 DE5
    5/0 D D D D D D D D D D D D D D D D
    5/1 D DE5 D D DE5 D D DE5 D D DE5 D D DE5 DE5 D
    6/0 D D D D D DE5 D D D D D D D D D D
    6/1 D D D D D D D D D D D D D D D D
    7/0 D D DE5 D D DE5 D D D D D D D D D DE5
    7/1 D D D D D D D DE5 D D DE5 D D DE5 D D
    8/0 D DE5 DE5 D DE5 DE5 D DE5 D D DE5 D D DE5 D DE5
    8/1 D D DE5 D DE5 DE5 D DE5 D DE5 DE5 D DE5 DE5 D DE5
    9/0 D D D D D D D D D D D D D D D D
    9/1 D D D D D D D D D D D D D D D D
    10/0 D D D D D D D D D D D D D D D D
    10/1 D D D D D D D D D D D D D D D D
    11/0 D D D D D D D D D D D D D D D D
    11/1 D D D D D D D D D D D D D D D D
    12/0 D D D D D D D D D D D D D D D D
    12/1 D D DE5 D00 D DE5 D00 D D D00 D D D00 D D DE5
    13/0 D D D D D D D D D D D D D D D D
    13/1 D D D D D D D D D D D D D D D D
    14/0 D D D D D D D D D D D D D D D D
    14/1 D D D D D D D D D D D D D D D D
    15/0 D DE5 D D DE5 D D DE5 D D DE5 DE5 D DE5 DE5 D
    15/1 D D D D D D D D D D D D D D D D
    16/0 D D D D D D D D D D D D D D D D
    16/1 D D D D D D D D D D D D D D D D
    17/0 D D D D D DE5 D D D D D D D D D D
    17/1 D D DE5 D D DE5 D D D D D D DE5 D D DE5
    18/0 D D D D D D D D D D D D D D D D
    18/1 D D D D D D D D D D D D D DE5 D D
    19/0 D D D D D D D D D D D D D D D D
    19/1 D D D D D D D DE5 D D DE5 D D DE5 D D
    20/0 D DE5 D D DE5 D D DE5 D D DE5 D D DE5 DE5 D
    20/1 D DE5 D D DE5 D D DE5 D D DE5 DE5 D DE5 DE5 D
    21/0 D D DE5 D DE5 DE5 D DE5 D D DE5 D DE5 DE5 D DE5
    21/1 D D DE5 D D DE5 D D D D DE5 D DE5 DE5 D DE5
    22/0 D DE5 DE5 D DE5 DE5 D DE5 D D DE5 DE5 D DE5 DE5 D
    22/1 D DE5 DE5 D DE5 DE5 D DE5 DE5 D DE5 DE5 DE5 DE5 DE5 DE5
    23/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    23/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    24/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    24/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    25/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    25/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    26/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    26/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    27/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    27/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    28/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    28/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    29/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    29/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    30/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    30/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    31/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    31/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    32/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    32/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    33/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    33/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    34/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    34/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    35/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    35/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    36/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    36/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    37/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    37/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    38/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    38/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    39/0 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    39/1 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5 DE5
    80 tracks(40/40), 1280 sectors (686 Compressed)
    
    
    #22DISK
    BEGIN SAN1 Sanyo MBC-1000, MBC-1150 - DSDD 48 tpi 5.25" - 256 x 16
    INSERT 22DISK DEFINITION HERE
    END
    
    #cpmtools
    # SAN1 Sanyo MBC-1000, MBC-1150 - DSDD 48 tpi 5.25" - 256 x 16
    diskdef san1
    seclen 256
    tracks 80
    sectrk 16
    blocksize 2048
    maxdir 64
    skew 3
    boottrk 2
    os 2.2
    end
    
    # libdsk data below
    [san1]
    description = SAN1 Sanyo MBC-1000, MBC-1150 - DSDD 48 tpi 5.25" - 256 x 16
    sides = alt
    cylinders = 80
    heads = 2
    secsize = 256
    sectors = 16
    secbase = 1
    datarate = DD
    
    #GOTEK/Flashfloppy
    [san1]
    cyls = 80
    heads = 2
    secs = 16
    interleave = 3
    bps = 256
    id = 1
    #rpm = 360
    rpm = 300
    rate = 250
    mode = mfm
    iam = no
    
    
    $ cpmls -f san1 -D SMBC1100.RAW
    Name Bytes Recs Attr update create
    ------------ ------ ------ ---- ----------------- -----------------
    ASM .COM 8K 64 R
    BAR .BAS 2K 11 R
    BASIC .COM 30K 234 R
    CHR$ .BAS 2K 2 R
    CPM .SYS 4K 22 R
    DCOP .COM 4K 19 R
    DDT .COM 6K 38 R
    DDUMP .COM 4K 17 R
    DUMP .COM 2K 4 R
    ED .COM 8K 52 R
    FDUMP .COM 4K 24 R
    FILECOPY.COM 2K 11 R
    FORMAT .COM 2K 8 R
    FRCV .COM 2K 8 R
    FTRN .COM 2K 8 R
    LINE .COM 2K 8 R
    LOAD .COM 2K 14 R
    MERGE .COM 14K 110 R
    MOVCPM .COM 10K 76 R
    PIP .COM 8K 58 R
    SORT .COM 22K 162 R
    STAT .COM 6K 42 R
    SUBMIT .COM 2K 10 R
    SYSGEN .COM 2K 6 R
    VERIFY .COM 2K 8 R
    XCHG .COM 8K 58 R
    XREF .COM 10K 78 R
    XSUB .COM 2K 6 R
    28 Files occupying 172K, 138K Free.
    
    
    #cpmcp -f san1 SMBC1100.RAW 0:*.* /home/larry/IMDs/Sanyo-MBC-1000/SMBC-1100
    Required cylinders: 40
    Required heads : 2
    Data rate : 250kbps
    Double Density 16 Sectors x 256 bytes per sector


    Write the Image to a 5.25" DS/DD Floppy with IMD using 40 Tracks Single Step for a 360K Drive.
    Boot on the SBC.

    Larry
    Last edited by ldkraemer; May 17, 2021, 02:45 PM.

    Leave a comment:


  • tonata
    replied
    Hi,

    A friend of mine is searching for the boot disks for Sanyo MBC 1250 and Sanyo MBC 1110. Do you know where to download them? Or would you be so kind to publish them if you have them?

    Leave a comment:


  • Chuck(G)
    replied
    A shame, because the 1250 has some very nice graphics capabilities (640x400 monochrome). It would be nice to have some software that took advantage of that.

    Leave a comment:


  • blue_oxen
    replied
    word star was the only program that i got with it. i fired it up today and played with it for a little bit was fun to use dos again been a long time .

    Leave a comment:


  • Chuck(G)
    replied
    Piece by piece won't get you much--you've got some DRAMs and a few LSI chips (most of which are still plentiful) and 96 tpi disk drives (not a huge demand for those, since most 1.2MB PC drives will do the same thing).

    I say keep it intact. Did you get any software for it? That might be an incentive.

    Post an advertisement in the "Marketplace" section and see if there's any interest. Be sure to include your location--bulky heavy things are more attractive if shipping costs can be minimized.

    Leave a comment:


  • blue_oxen
    replied
    I dont plan on getting rich on selling this. I more wanted to know if it was worth trying to sell as a complete unit as to parting it out and selling it peace by Peace I got this at a yard sale for 5 dollars so it will be hard to lose money on it in any case.

    Leave a comment:


  • Chuck(G)
    replied
    That is impossible to answer with any degree of accuracy.

    The Sanyo, while a very nice system, is late in the 8-bit CP/M era, so doesn't have the cachet of, say, an IMSAI 8080 or Tandy TRS-80. The most notable thing about it is that it's the last CP/M system that Sanyo marketed before moving on to the MBC-550 8088-based system. I may still have the manual for the thing sitting on my bookshelf.

    On the other hand, if you could find someone with an application that requires the 1250 to run (possible, with the graphics), they might be motivated to pay a decent price. But many might balk at free if it mean the cost of shipping.

    In short, it depends on your customer. Maybe nothing, maybe enough to buy a nice meal for two at a good restaurant. The rule for these things in my experience generally is "less than you think".

    Sorry not to be more helpful.
    Last edited by Chuck(G); May 9, 2009, 08:02 PM.

    Leave a comment:


  • blue_oxen
    started a topic sanyo mbc-1250

    sanyo mbc-1250

    How much would a working sanyo mbc-1250 be worth.
Working...
X