soviet9922
Veteran Member
Hi guys, got an apple II+ recently in not so bad shape.
After doing the basics (removing all ics cleaning sockets and legs on all ics on the board) checked that everthing was in place.
Someone have been in here because one of the rams was missing and some other rams where so brittle that the pins fall of from them.
Replaced this 4116 chips for new ones.
Now using a tested good power supply from my platinum, power it up and see this display of static garbage on screen.
What is see is they are only 2 roms on the motherboard, this is ok ?, all sockets need to be populated ?.
Open to any suggestions about possible problems.
After doing the basics (removing all ics cleaning sockets and legs on all ics on the board) checked that everthing was in place.
Someone have been in here because one of the rams was missing and some other rams where so brittle that the pins fall of from them.
Replaced this 4116 chips for new ones.
Now using a tested good power supply from my platinum, power it up and see this display of static garbage on screen.
What is see is they are only 2 roms on the motherboard, this is ok ?, all sockets need to be populated ?.
Open to any suggestions about possible problems.