keenerb
Veteran Member
I finally pulled apart my 1100FD to fix the floppy belt, and encountered a problem.
The replacement belts from two different vendors would not work, despite appearing identical to original (as far as I can tell.)
After a few revolutions, the belt would ride up on the large pully and catch on the PCB itself.
I bought a different belt, a round red one, for a Korg EME-216 system:
This one has worked fine so far:
The replacement belts from two different vendors would not work, despite appearing identical to original (as far as I can tell.)
After a few revolutions, the belt would ride up on the large pully and catch on the PCB itself.
I bought a different belt, a round red one, for a Korg EME-216 system:
This one has worked fine so far: