RWallmow
Veteran Member
Title says it all...First of all I have yet to crack this one open (don't know where I have my long T15 packed away at). I am wondering if there is something common I should look for once I get it open, sounds to me like a problem on the analog board since it beeps and blindly reads away/boots from the floppy, so the digital board, I assume is fine.
I could luck out and it could be as simple as the CRT yoke is off when I end up getting it apart, but I figured I would ask for some suggestions while I wait for either a new torx driver or find my old one.
Thanks,
-Ryan
I could luck out and it could be as simple as the CRT yoke is off when I end up getting it apart, but I figured I would ask for some suggestions while I wait for either a new torx driver or find my old one.
Thanks,
-Ryan
Last edited: