Hi!, I just purchased a Compaq Portable II and it boots from drive A>. However, I can’t boot from the HDD. I get a 1790-Disk 0 Error.
I used an IBM AT Diagnostics Disk to set the bios and it seems to a cost my changes. I set the HDD Disk Type to 13 for the NEC D3142 disk drive installed. A type 13 was the closest match.
Anyone have any ideas?
Thanks you,
Howard
I used an IBM AT Diagnostics Disk to set the bios and it seems to a cost my changes. I set the HDD Disk Type to 13 for the NEC D3142 disk drive installed. A type 13 was the closest match.
Anyone have any ideas?
Thanks you,
Howard