geneb
Veteran Member
I'm building an imaging workstation around a Pentium-MMX motherboard and the addition of a CompatiCard IV has got it throwing an error when himem.sys kicks off:
ERROR: Unable to control A20 line.
XMS Driver not installed.
I previously had a different 8 bit, 4 drive controller in the system, but it wouldn't pass the single density tests that Dave Dunfield's TESTFDC perform.
The CompatiCard IV is configured with the defaults shown in the "quick start" section of the manual.
There's no explict A20 control options in the bios configuration (Award BIOS v4.51PG).
Without the card, there's no issues.
Help!
thanks.
g.
ERROR: Unable to control A20 line.
XMS Driver not installed.
I previously had a different 8 bit, 4 drive controller in the system, but it wouldn't pass the single density tests that Dave Dunfield's TESTFDC perform.
The CompatiCard IV is configured with the defaults shown in the "quick start" section of the manual.
There's no explict A20 control options in the bios configuration (Award BIOS v4.51PG).
Without the card, there's no issues.
Help!
thanks.
g.