Just discovered three boxes full of PC stuff, don't think I am going to use it.
None of this has been tested!
Televideo audio board with separate CD interface for Sony, Mitsumi, Panasonic and IDE, 16 bit.
Hayes accelerator3900GO V2.1 with 9 pin D plug, no idea what it is.
AT Bus expansion RAM, 2.5MB, 16 bit, fully populated with 90 256x1 DRAM, i used to use this, comes with manual, also bottom end of board cut to miss something with added on power bus cables. 30GBP
Lots of MBC 8 bit ADC & DAC boards, use 7109 and two DAC80s which are missing.
A Nicolet 8 bit card with 25 pin plug, no idea what it does, also a Nicolet card with two 10 pin ports, both are 8 bit XT cards.
An Intel RAM expansion board, 2MB max, fitted with 18 256K DRAMs, 16 bit, lots of unpopulated chip locations. 30GBP
An ATRAMBANK RAM expansion board, 2MB max, fitted with 72 256K DRAMs, 16 bit. 30GBP
An TECVAR RAM expansion board, space for 54 DRAMs, none fitted, presumably 16K or 64K parts because an 8 bit XT bus interface, also 58167 RTC, serial and parallel ports. 30GBP
An XT mono graphics board with a 6845 and lots of TTL, also parallel port, has the number 1501985 painted on it, no other id.
A Loughborough Sound Images TMS32020 applications and development board, with BB PCM75JG adc.
A Wyse WY700 high resolution mono graphics card, used to use this, monitor got binned but should have the manual and software, somewhere.
Various SCSI disc drives and CD ROM drives, also some parallel port adapters, somewhere.
A pair of Iomega Bernoulli 44 MB drives, have OK written on them, used to use these.
A HP surestore dot 24 mag tape drive.
Various CD ROM drives, IDE and SCSI.
A 286-12 motherboard with lots of ISA slots, full size.
A 286-12 motherboard with a riser connector for the ISA slots, but no riser.
Unpriced IO boards 10GBP, all plus postage. If interested in the other items then please ask, all needs to go.
None of this has been tested!
Televideo audio board with separate CD interface for Sony, Mitsumi, Panasonic and IDE, 16 bit.
Hayes accelerator3900GO V2.1 with 9 pin D plug, no idea what it is.
AT Bus expansion RAM, 2.5MB, 16 bit, fully populated with 90 256x1 DRAM, i used to use this, comes with manual, also bottom end of board cut to miss something with added on power bus cables. 30GBP
Lots of MBC 8 bit ADC & DAC boards, use 7109 and two DAC80s which are missing.
A Nicolet 8 bit card with 25 pin plug, no idea what it does, also a Nicolet card with two 10 pin ports, both are 8 bit XT cards.
An Intel RAM expansion board, 2MB max, fitted with 18 256K DRAMs, 16 bit, lots of unpopulated chip locations. 30GBP
An ATRAMBANK RAM expansion board, 2MB max, fitted with 72 256K DRAMs, 16 bit. 30GBP
An TECVAR RAM expansion board, space for 54 DRAMs, none fitted, presumably 16K or 64K parts because an 8 bit XT bus interface, also 58167 RTC, serial and parallel ports. 30GBP
An XT mono graphics board with a 6845 and lots of TTL, also parallel port, has the number 1501985 painted on it, no other id.
A Loughborough Sound Images TMS32020 applications and development board, with BB PCM75JG adc.
A Wyse WY700 high resolution mono graphics card, used to use this, monitor got binned but should have the manual and software, somewhere.
Various SCSI disc drives and CD ROM drives, also some parallel port adapters, somewhere.
A pair of Iomega Bernoulli 44 MB drives, have OK written on them, used to use these.
A HP surestore dot 24 mag tape drive.
Various CD ROM drives, IDE and SCSI.
A 286-12 motherboard with lots of ISA slots, full size.
A 286-12 motherboard with a riser connector for the ISA slots, but no riser.
Unpriced IO boards 10GBP, all plus postage. If interested in the other items then please ask, all needs to go.